Jump to content
SAU Community

Recommended Posts

i have just brought a r32 and need the replace the head lamp globes

And the are not your standard h4 Hellogen globes

But the plug on the harness appears to be a h4 type plug

Can some please shed light on this for me

What year is your R32?

From memory, models from '89 to mid '92 were all H3C and from after mid '92 to 94 were all H4.

That's for the Low Beams.

H3C = Most ridiculously uncommon plug type and yet Nissan had to use it :verymad:

Thank goodness they switched to H4 in the later models.

Link to comment
https://www.sau.com.au/forums/topic/456656-r32-headlamps/#findComment-7538709
Share on other sites

Projectors came in both h1 and h3c types.

Dependant on year.

They have different mounts in the projectors for the bulb.

I see, must be the later models up to mid '92.

As I have a '90 model and needs H3C.

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/456656-r32-headlamps/#findComment-7538973
Share on other sites

for N1 lights,
is it possible to use xenon bulbs for the inner "fog lights"?
i know xenons are not good for the rear reflector type main beam for on comming traffic, but probably suitable for the secondary foggies?

Link to comment
https://www.sau.com.au/forums/topic/456656-r32-headlamps/#findComment-7539498
Share on other sites

Hi guys, quick question!

I seem to have the Post 91 Housing, but the plug leading to my headlight is a 3 pin in a U shape, like an H4 Bulb

i have put GTR headlights in my car, they work fine with HID's but im sick of them and want normal globes, would it be a case of fittings bulbs that fit the housing and wiring them up?

Link to comment
https://www.sau.com.au/forums/topic/456656-r32-headlamps/#findComment-7540114
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...