Jump to content
SAU Community

Recommended Posts

http://www.users.on.net/~goofyhsk/info/chassis_plate.html

You can use that as a guide on how to decode the plate and what each letter means. For that plate I have no idea what the last 3 letters mean. But seems like a Standard GTR that's imported.

If it was ADM or Nismo, etc you'd notice the letters would have a certain combination, etc.

BNR32002355 would indicate an early run from 1989. These are in demand in USA now.

Model# alphanumeric indicates what it came out of the factory with.

See if "Iron Chef Imports" might export it for you to the State, depending on its condition. In the USA he's known as Iron Block imports

You should have an import plate also as Terry said in addition to the build plate. Once a car is registered in Australia for the first time though the import plate doesn't have to be displayed either after that.

If in doubt you can always check the VIN number on Nissan Fast or something to confirm the status of the car.

Once the car is registered it will have all the compliance details attached to it as it's required.

Edited by breaker1845

lol the fact that he would have payed plenty for an aust delivered, if he didnt pay through the nose and some how ended up with one and never realized it... he would have won at life.

i have however wandered how much my 89gtr would be worth in the USofA this year....... just y'know.. wondered :)

It's gun metal grey so it's an import

Aussie ones only came in red, silver and black. Apart from a couple that were used as pace cars that momo did a few things to and they were green

Also if it was brought in under the 15 year rule (before it was changed) it won't have an Australian compliance plate

There is a thread for getting VIN's fasted you can post in if you don't mind waiting a day or so to get the results back.

Ghost posted the link earlier, just go to the last page and add the VIN you want fasted I guess. Should provide most of the details.

If the car is currently registered in a state you can also go to the state government website and do a quick check with the VIN for details regarding compliance and security for free or a small fee usually.

Edited by breaker1845

almost no need to fast bud. we practically share vins.

post-60068-0-78905100-1432083207.jpg
20150201_173054_zpswudvduj6.jpg

K: Coupe

B: 2.6L (GTR)

N: Super Hicas + Attessa

R32: 8th Generation Skyline
R: 2 Doors

X: GTR (16 Inch Wheels)

F: 5 Speed Manual
S: Intercooler + Turbo + EGI
L: Fog Lights

then it gets choppy...

mzg

GH05T, on 03 Feb 2015 - 09:51 AM, said:snapback.png

ok more research shows allot of conflicting info

M: Limited slip diff/ rear wiper less (which i have) ???

Z: Cold weather pack/ early n1 spec ???

G: still nothing

GH05T, on 03 Feb 2015 - 10:41 AM, said:snapback.png

so more info suggests the following

M = P+Q (Climate control + upgraded sound)

Z = Cold pack? heated side rear view mirrors

G = B+D (ABS + Visc LSD)

still unsure as M states elsewhere about the wiperless windscreen which i do have.


never found out for sure.
.... but yours has a rear wiper, mine did not. otherwise almost identical base cars.

Edited by GH05T
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Are you suggesting that the kit did a cheap and nasty job of just jamming the wheel in between other things and caused the misalignment? I mean, we normally do this with an integrated crank trigger wheel, not something bodged on. It's not 1995 any more.
    • I mean, given the number of BMWs you own their tolerance for improper torque is rather low. The number of torque + angle spec bolts and non-reusable bolts in one is nuts.
    • Atmospheric vent requires something that doesn't use a MAF for load. You would need a standalone ECU for that.
    • Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
    • Hi...a little refresh. Is Nistune gonna be enough to run BoV? Or do i need some proper ECU? 
×
×
  • Create New...