Jump to content
SAU Community

Recommended Posts

My kit arrived today. Looking forward to getting some decent brakes under the Stagea.

Great! I was just waiting to hear back if it had been sent lol >.<

My kit has arrived. Time to start looking at what I want to do with the master cylinder arrangement, and the rear brakes.

Might look closely at a twin MC with balance bar and upgrade the whole system.

Hey so for the uninitiated (or the unintelligent) is this upgrade to the BMC required? I have an R32 GT-R if that matters. Cheers

Hey so for the uninitiated (or the unintelligent) is this upgrade to the BMC required? I have an R32 GT-R if that matters. Cheers

I believe the R32 GTR already has a BM57 BMC, which is what is recommended for the kit. I will confirm and let you know if that is not the case.

Also, is this upgrade likely to impact RWC?

Unsure how strict Vic is with RWc's. Sorry I don't have any info, might be best investigating with someone in your state :)

I believe the R32 GTR already has a BM57 BMC, which is what is recommended for the kit. I will confirm and let you know if that is not the case.

Not the case, V spec may be different

Not the case, V spec may be different

Hmm, apologies, I was under the impression all GTR R32/33/34 had the BM57 BMC.

Can you confirm what it does have Joe? :D

  • 2 months later...

is this group buy still going on?????

No it finished some time ago.

There will be an upcoming group buy for the rear kit however, I will chat with the guys and see if the front kit can be incorporated in to the same group buy :)

  • 2 weeks later...

Keen for a GB on the rear brake adaptors. Bought their front kit and it works wonders!!

Should be happening soon, I believe they are just finalising a few things with the kit, it will be on display at WTAC though, so if not before it should be very close. I have made a list of people who have expressed an interest and will message everyone once the group buy is up :)

  • Like 1
  • 3 months later...

Could you let me know if your doing another group buy as I will need the front adapter brackets for the brembos on the front of my r32 Gtr and possibly the rears to pls

Perhaps send a PM to timmy_89 if you haven't already as he is the organiser of the group buys and there has been a more recent one at:

http://www.sau.com.au/forums/index.php?/topic/460654-Alpha-Omega-Racing-Evo-350mm-Big-Brake-Kit-Group-Buy-Round-2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
×
×
  • Create New...