Jump to content
SAU Community

Recommended Posts

Hi guys,

Hoping for some thoughts on this.

i've replaced my factory radiator with a new 40mm alloy radiator and now my coolant temps don't want to go above 75 C.

i've been reading up about replacing the clutch fan with electric but i'm happy with the clutch fan for simplicity (street driven car)

bearing in mind its winter here in NZ, should i just not worry about this and suck up the slight increase in petrol consumption or are there any alternatives?

i was thinking perhaps an R34 thermostat instead of the r33 thermostat?

i'm not opposed to electric fans either.

cheers

Link to comment
https://www.sau.com.au/forums/topic/456949-new-radiator-now-better-cooling/
Share on other sites

Just try a new R33 thermostat first. Many years ago I did on my RB20 exactly what you just did. Only replaced the rad because the end tank cracked - not because (I thought) I had inadequate cooling. The result was that the coolant ran cold and I used a heap of fuel. Put a new thermostat in and the problem went away.

What was actually happening is that the old thermostat was actually no good - stuck open, and the radiator was also not real good. Must have been part blocked or something. It wasn't doing enough cooling and the two of them together were actually keeping my coolant temperature in about the right range. Replaced the rad and threw that precarious balance out!

  • Like 1

I bought a new 82c thermostat and it's clearly 65ish in the real world. I wouldn't be surprised if the Nismo thermostat is actually the 'new' standard thermostat that gets sold.

At least that's whats happened to me... from buying new thermostats trying to get one that's better/higher/more suitable? than the 65c one that seems to always end up in my car.

.. different radiators, too.

What's the idea of a lower temp thermostat? It doesn't increase cooling capacity at all and at best would buy you an extra lap maybe 2 if you're having heat problems

For the nismo whores.

Sort the real issue out, don't band aid it.

Nismo thermostat runs a higher temp but your right, a normal thermo should still operate properly.

why would it run a higher temp? lol

R34 thermostat opens at 82 degrees so your water temp will be close to 90

R33 thermostat opens at 77 degrees so your water temp will be close to 85 or so

I prefer to run a lower temp one simply because when you're on the track there's a greater range before water boils. I'm using a 62.5 thermostat lol... but that's no ideal for a street car because your oil temp is too low (even if you have an oil thermostat as the oil temp is relative to the water temp due to the heat exchanger).

Also R32/33/34 thermostats are the same size... I made the mistake of fitting a R34 GT-t thermostat in my R33 and kept on scratching my head on why the water was always close to 90 degrees.

  • Like 2

what water temp are you trusting here?

stock sensor and gauge?

In my case, stock sensor and gauge, aftermarket sensor and gauge, and the ECU temp sensor and gauge (via the ECU program)

I got an oil temp sensor and gauge specifically to see what my oil temp was, because I was certain it either wasn't 65C, or if it wasn't... to find out what it was.

I put a Nismo Thermostat in my R33, it now sits bang on 68 degrees no matter what, until I start putting my boot in. Then the koyorad keeps it below 95c even after 4+ hot laps on the track...

Only issue is it is TOO cold... my tuner had to adjust the powerfc water temp adjustment data, because he was needing to spend time on the dyno trying to warm it up so it would be running in the correct parts of the maps for power.

i've replaced the thermostat with some success, the temp now comes up past 75 and makes it to 78 but stays at 78, this is good i guess, its winter and pretty cold here at the moment so i won't worry about the enrichment, haven't given it a death thrash yet....lost a bit of skin on my knuckles changing it....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...