Jump to content
SAU Community

Spool 3.4

Wyn

By Wyn,
in Engines & Forced Induction

 Share

Recommended Posts

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Looking on Spool imports site I see they list a complete RB34 short engine, block, crank and pistons etc etc

Has anyone got one and what do you think of it and the build work done?

btw, for use with RB25/34 road/drag use

cheers

They used to have a video on their site of one a dyno making about 900hp but haven't seen anyone actually post one up here.

Link to comment
https://www.sau.com.au/forums/topic/457460-spool-34/#findComment-7550239
Share on other sites
Wyn Contributor

Wyn

Posted
  • Author
Posted

Cheers, from what Spool have told me that bottom end is good for 8 - 9k rpm limit

But what head would peeps recommend using between the 2.5 GTST head and the Neo head for a 3.4 conversion?

To make full use of that rev capability I have the option of using my current RB25/30 GTST s1 head with Tomie pon cams but still on hydraulic lifters. That I've been advised (and used) 7.6k as a limit and believe it shouldn't be reved higher?

Or go buy and build it with a neo head and high lift cams to make full use of the bottom ends rev range

26 head is out as none of my ancillaries are going to fit. Any other options other then convert my GTST head to solid ?

Link to comment
https://www.sau.com.au/forums/topic/457460-spool-34/#findComment-7550875
Share on other sites
Wyn Contributor

Wyn

Posted
  • Author
Posted

atm I am using a T3 bb GT35 but with a 1.06 exhaust housing. If that will now be undersized I don't know? But when it was mapped as a 3.0 it wanting to keep making power past its 7.6k rpm (safe) limit so maybe not?

As for the rev range yes it seemed odd but as they don't know 100% what I will be bolting onto it that's maybe why?

I haven't got a problem with that, more that I am happy I know a safe range ... or max when built

Yes the head needs to be right and be able to run to the bottom ends limit

Link to comment
https://www.sau.com.au/forums/topic/457460-spool-34/#findComment-7551093
Share on other sites
Mick_o Grand Master

Mick_o

Posted
Posted

A GT35 will have epic response on a 3.4L certainly wouldn't be testing the bottom end of the spool kit. Nor would i think it'd warrant a big $$$ head either.

I'd imagine a GT35 falling off around or probably before 7K.

Depending on what exactly your plans are for the car maybe start looking for something like a 6466?

Link to comment
https://www.sau.com.au/forums/topic/457460-spool-34/#findComment-7551129
Share on other sites
Wyn Contributor

Wyn

Posted
  • Author
Posted

As above I can only repeat what I was told by the dyno operator re it still making power all the way to its redline of 7.6kI

it would have reved on and made more if it wasn't for the hydraulic lifters

btw this is a sunday toy and for occasional drag strip use hence wanting the spec

Link to comment
https://www.sau.com.au/forums/topic/457460-spool-34/#findComment-7551370
Share on other sites
GTRPSI Mentor

GTRPSI

Posted
Posted

Sounds like a bit of a greek salad.

Your going to the trouble of selecting a 3.4L for a drag build and then talking about limiting it with the head and turbo.

For drag, RPMs can help with the power up top, turbo needs to run up there and not be restrictive in housing.

Big lift cams and big turbo housing can get you some serious MPH but will sacrifice streetability.

The other thing is rod stroke ratio and piston speeds if your going to rev a 3.4L hard.

Get yourself a RB30, forget about stroking it and go from there.......your not in the zone for a stroker.

25/30, forged bottom end, bit of head work, right cams and turbo and your there without the stroker expense, if it blows its not so much of a money pit and cheap to rebuild/replace.

Link to comment
https://www.sau.com.au/forums/topic/457460-spool-34/#findComment-7551401
Share on other sites
Wyn Contributor

Wyn

Posted
  • Author
Posted

No I don't want to limit it with turbo or head but just thoughts on what would be the better way to go?

Maybe there isn't? If I stay with a GTST it will cost to get the head converted to solid and new cams

Or if I went neo it will cost again for cams and a head.

Both might end up about the same?

Yes I use the car up the strip but its not going to be an out and out drag engine, as I still drive it as a day to day car (when its not raining lol)

Will see what turns up anyway as neo heads aren't that easy to come by by the looks of it either

Link to comment
https://www.sau.com.au/forums/topic/457460-spool-34/#findComment-7551412
Share on other sites
jangles Veteran

jangles

Posted
Posted

No I don't want to limit it with turbo or head but just thoughts on what would be the better way to go?

Maybe there isn't? If I stay with a GTST it will cost to get the head converted to solid and new cams

Or if I went neo it will cost again for cams and a head.

Both might end up about the same?

Yes I use the car up the strip but its not going to be an out and out drag engine, as I still drive it as a day to day car (when its not raining lol)

Will see what turns up anyway as neo heads aren't that easy to come by by the looks of it either

Neo head with a shim under conversion is on par with a 26 generally.

Gt35 does not seem big enough to warrant a 3.4

6466 is a great combo for a 3l.

You should make 500kw + (e85) never have to worry about how high your limiter is.

Save the extra from the stroker crank, put it into the head.

Link to comment
https://www.sau.com.au/forums/topic/457460-spool-34/#findComment-7553045
Share on other sites
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

No I don't want to limit it with turbo or head but just thoughts on what would be the better way to go?

Maybe there isn't? If I stay with a GTST it will cost to get the head converted to solid and new cams

Or if I went neo it will cost again for cams and a head.

Both might end up about the same?

Yes I use the car up the strip but its not going to be an out and out drag engine, as I still drive it as a day to day car (when its not raining lol)

Will see what turns up anyway as neo heads aren't that easy to come by by the looks of it either

Get Rips to ship you a 3.2 engine - he may be able to find you a Neo head as well.

http://www.ripsracing.com/

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/457460-spool-34/#findComment-7553074
Share on other sites
Huzqld Enthusiast

Huzqld

Posted
Posted

Neo head with a shim under conversion is on par with a 26 generally.

Gt35 does not seem big enough to warrant a 3.4

6466 is a great combo for a 3l.

You should make 500kw + (e85) never have to worry about how high your limiter is.

Save the extra from the stroker crank, put it into the head.

What's involved in doing the shim-under conversion on the Neo head?

Link to comment
https://www.sau.com.au/forums/topic/457460-spool-34/#findComment-7553145
Share on other sites
Wyn Contributor

Wyn

Posted
  • Author
Posted

Cheers, have decided to go for the neo head so am on the lookout for one now

As for the 3.4 motor its a done deal. Deposits made so the sooner its built and over here the sooner I can get on with it

In the mean time I have my 25/30, turbo and injectors etc etc which I can use to help finance this new build

Will see how it all pans out I guess so no doubt I'll have a few more questions lol

btw, Talking of injectors am I still likely to get away with my 740 nismo s/feed injectors, greddy copy manifold on a Neo?

Or is that impossible to say till its fully speced

Cheers

Link to comment
https://www.sau.com.au/forums/topic/457460-spool-34/#findComment-7553244
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...