Jump to content
SAU Community

Recommended Posts

hey I just checked nissan fast for the part numbers and they do seem different for a s1 and s2 but I remember purchasing a s2 bonnet and the mat from my s1 fit perfectly. here are the numbers anyway

S1: 65840-15U00

S2: 65840- 26U00

Hang in there Hadouken, I'm just waiting on price landed in Australia.........I've contacted the business and am waiting on a price.

Once I get this I will move from an EOI to an actual group buy with firm committments and deposits etc.

tridentt150v - GTst S2, I might get two anyway, put one away for ron??

hadouken - GTR R33

89CAL - Gtst S2 Get another one so x 2

Robzilla - GTR - R32

Ty1 - Gtst S1

kingtube69 - Gtst S2

kila32 - GTR R34

R33 gtrv-spec - GTR R33

When I do order I have asked for shipping and not air frieght to reduce the cost......it will mean a delay in supply but given that the mat doesn't stop you driving your car I think we can all live with that.

I also need to talk to the business about how we go about it - it could be that they will be happy for me to collect the numbers etc and they assume control of the business side - which would be fine as well, I'm def not in it for $$$ only to pay for and get my mat and [corny I know] help others do the same.

Not joking at all tridentt150v

The carbon bonnet also has some sort of matt, just a small one above the turbos.

See attached pic

<script src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/74e632ee/background/helpers/prefilterHelper.js" type="text/javascript"> </script>

i'd be a 100% in on one of these if by any chance you can get one??

Ok not much of an update, Import Monster are still yet to get back to me with a price. They say that the Gtst ones are fine [but didn't offer any more info than that] but they are still waiting on ones for the GTR's.

SCRMER - what model?....R34 GTR?

Ok not much of an update, Import Monster are still yet to get back to me with a price. They say that the Gtst ones are fine [but didn't offer any more info than that] but they are still waiting on ones for the GTR's.

SCRMER - what model?....R34 GTR?

2000/01 - Vspec II - It's the small mat that sits next to the naca duct on the CF bonnet. The one in the pic that StretchGSK posted

I honestly have no idea, but how much can they charge for a bath mat??? :woot: At least yours should be easy to post out, not like our two man tents.

I have asked and will inform when I get the answer, but all I can do for now!!!

Coincidence or what>>>I thought I'd better update and there was your msg.

Was away last week with work [and in the outback] so I couldn't follow up. I asked the supplier yesterday but as yet haven't received a reply.

Hopefully some time today??? as soon as they reply I'll be on here.

I'm just as keen as you guys.....but I don't want to badger the supplier either so am treading that fine line between keen buyer and serial pest...........lol.

Hot off the press.........reply from Import Monster just now!!!

"Nissan's been closed due to O-Bon week in Japan for the past week or so, so I'm expecting to hear back from them any day now.

R33 Gts25t S1: 65840-15U00
R33 Gts25t S2: 65840-26U00
Looking at about $255 ea for the ones above, based on an order quantity of 6.

Once I've got an idea on the pricing of the GT-R ones, I'll be able to give you a more accurate idea on the breakdown for each."

And that's way better than the $900 I was quoted for one from another business - quantity and surface freight working for us!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...