Jump to content
SAU Community

Recommended Posts

I've decided housing affordability = directly proportional to Alex's financial position

Well it goes a little against the grain of what your saying though doesn't it.. Cos if houses were more affordable.. Then more people would buy them so I'd make even more money.

Hrmm...

last realestate q for the day.

lets say I'm looking at a 250K block and a 350K house.

buying block off the plan so won;t be ready for a bit so will prob be at least 12 months between buy block and start house.

lets say i have 100K for deposit

How does that work with a loan.

Do I take out loan with full deposit for the block, then when ready for house refinance for the full amount.

or is the initial loan for the full amount and just withdraw and needed?

or take out loan with part the deposit for the house then use the rest when financed the house itself?

exactly right.

a farmer is sub diving a Padock into 6 lots

5 - 6 acres each.

but that said he needs to run power/water to each (that part of the advertisement) plus fencing and such.

it's interesting there 6 blocks 5 currently at 350K 1 at 280

so they obviously trying to work out what price they should be at, from other blocks seen for sale I think 5 are 220ish and the one I want 250-260K

Just offer what you feel it's worth in writing if he knocks it back no harm done

last realestate q for the day.

lets say I'm looking at a 250K block and a 350K house.

buying block off the plan so won;t be ready for a bit so will prob be at least 12 months between buy block and start house.

lets say i have 100K for deposit

How does that work with a loan.

Do I take out loan with full deposit for the block, then when ready for house refinance for the full amount.

or is the initial loan for the full amount and just withdraw and needed?

or take out loan with part the deposit for the house then use the rest when financed the house itself?

If it's 12 month settlement (title) you can't take out a loan as finance pre approvals are only valid for like 3 months so you pay deposit and work out the rest closer to settlement

But down the track you'd ideally borrow no more than 80% to avoid LMI

last realestate q for the day.

lets say I'm looking at a 250K block and a 350K house.

buying block off the plan so won;t be ready for a bit so will prob be at least 12 months between buy block and start house.

lets say i have 100K for deposit

How does that work with a loan.

Do I take out loan with full deposit for the block, then when ready for house refinance for the full amount.

or is the initial loan for the full amount and just withdraw and needed?

or take out loan with part the deposit for the house then use the rest when financed the house itself?

Are you going to be using a major registered builder like henley homes etc or is it a mates build type thing?

There are huge differences in how BICOE funding works depending on who's building it.

The long and the short of it, try to keep as much of your deposit free for the construction loan, not the land loan.

12 months apart they will be 2 separate deals.

So maybe use $30k max to pay deposit and legals for the block and keep as much of the remaining $70k as possible for the build.

Id try for 5% deposit on the land but if it's a developer likely they'll demand 10%

I read that as he needs to buy the land in entirity first, in which case he will need a bigger deposit for the LVR

Ham is correct.

the sub divide is passed with the council and shit but the work not done.

else would be easier.

I expect will take 12 months at least for the block to be ready to build

for ease of work this is the block looking at:

http://www.realestate.com.au/property-residential+land-vic-nagambie-201233937

and the builder something like:

http://diversebuilders.com.au/HomeDesigns/DesignDetails.aspx?dpk=20

(looking at a few builders but all similar)

and if you guys are confused think where I'm at!

That should all be doable as 1 deal so long as you pay the deposit out of your own pocket.

They are a registered builder so that deposit should be sufficient.

Ham is correct.

the sub divide is passed with the council and shit but the work not done.

else would be easier.

I expect will take 12 months at least for the block to be ready to build

for ease of work this is the block looking at:

http://www.realestate.com.au/property-residential+land-vic-nagambie-201233937

and the builder something like:

http://diversebuilders.com.au/HomeDesigns/DesignDetails.aspx?dpk=20

(looking at a few builders but all similar)

and if you guys are confused think where I'm at!

A rumpus, living room & family room. I wouldn't know what to do with all that space!

Makes my shoebox of a townhouse look even smaller in comparison to that haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...