Jump to content
SAU Community

Recommended Posts

hmm never looked up those numbers before,

So a pro driver can take mine around PI in 2.01/2.02 i'm pretty happy with that.

F6 times at winton not so great however..1.43 does not seem to like corners

To be fair that's the old F6 doe :P

Gunna chuck stock suspension back on mine for mad accell

if every single one of you guys decide to pull your finger our and follow your new calling (200+ seat restaurant) and set it up through me, ill be able to buy an 2017 R35.
do it for yourself lads, do it for momo.

There's a few different variants yeah, the one they tested would of been a BF but there's an R spec etc with diff handling options on them

They did bf and fg. Couple tenths in it. Different days however.

Mid 1:43 is where it at.

Arent you nearly 30?

what have you been doing for the last 12 years?

Working in retail management, had a bad couple of years with work and places closing down and retarded owners. (never work in retail it's so depressing)

swinging his dick like a helicopter in the front hard while doing that woop woop noise that zoidberg does.

Instead of watching me from a distance stop being a fag and come join me.

e5687d3eb8bf7234c756c4fd3fcaceaa.jpg&&0){for(var>

+11ty billion on hairdressers being the most craziest. As soon as they say i'm a hairdresser i'm outta there. I wonder why they are so crazy?

Edited by scotty014

I wonder why they are so crazy?

same reasons beauticians are in the same boat.

50% of their profession is talking to other women, generally the vindictive and scolding/fussy types. The same types who make sure every other women within a 50km radius knows about their triumphant divorce case to their 3 ex husbands and how to get the most out of the settlement. Theyre often career women who actually have jobs (unlike the Latrobe Valley kind that do not have jobs), so milking their 17 yro tradie boyfriend for money from unexpected pregnancy isnt the top of their priorities, but its on the list.

  • Like 2

Love is like a roller coaster; you pay a lot of money to be tossed around, and before you know it, the ride is over and you are covered in vomit. And if you are less than 4' 6" they dont even let you get on

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...