Jump to content
SAU Community

Recommended Posts

1 hour ago, Leroy Peterson said:

i'm selling a pair of 275/35/18 Yokohama advans (non-AD08) with minimal wear, so if anyone is hardcore hit me up. will do m8's r8's for VWL.

If only they were 19s.. 

Martin would of rubbed on the inside, I'm running 9.5 +30 on all 4 fine, the utes have massive rear clearance too people chuck 11s on the back of the utes! I'd suggest getting 19s though, 18s look too small on big ass falcon 

Edited by UNR33L

this was a 255 tyre on a 17 X 9 +36 and rubbed on the front strut.

(grabbed one of the old rims off the S14 when I got a flat..no bingo.

 

but I've buckled one of my current rums and deciding if I should fix or get new ones

 

 

25 minutes ago, UNR33L said:

Dezz brah, you in our out with 88e? Now is the time to make the call :P 

Ballsey dropping out of it now I reckon 

market halted in response to ASX inquiry. starting to get some Deja vu...........

london price friday night was pretty flat, not sure how today will do.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...