Jump to content
SAU Community

Recommended Posts

but someone else wired my car, i think i know what im talking about.

im super curious to see how my new-age-thinking crank trigger goes. super bike CDI coils should be good for an extra 20fwkw at phillip island.

21 minutes ago, Leroy Peterson said:

there isnt anything wrong with powerfc. i retained mine for so long because it was basically the only option. i didnt have a stock ecu to put a nistune into.

but i feel i've seen the light. it shocked me earlier today to see you can still buy powerfc's brand new (for some cars).

 

ever since haltech took on motec's pay model, its hardly value for money. mind you, every time I've asked someone "why do 90% of professional motorsport teams use motec?" the answer has always been "because they're the best" *queue Tina Turner*

and whats with haltech and CAS disc issues? (i know the disc is a POS, but does it work or doesnt it?)

 

Matt do you only chime in on SAU when you feel like arguing with someone?

 

Key word being motorsport professionals...the kind of guys who have already bought everything else they can legally buy...and replace fender bolts with titanium ones because it saves 300 grams! On the street or amateurs around a track, another psi of boost or better tyres will do more for your performance!

5 minutes ago, Birds said:

Key word being motorsport professionals...the kind of guys who have already bought everything else they can legally buy...and replace fender bolts with titanium ones because it saves 300 grams! On the street or amateurs around a track, another psi of boost or better tyres will do more for your performance!

i was more pointing at: what does motec have/do that others cannot match?

8 minutes ago, Birds said:

Key word being motorsport professionals...the kind of guys who have already bought everything else they can legally buy...and replace fender bolts with titanium ones because it saves 300 grams! On the street or amateurs around a track, another psi of boost or better tyres will do more for your performance!

 

actually f**k all that stuff.

for us amateurs best way to get faster times is seat time...

 

true story.

13 minutes ago, Leroy Peterson said:

i was more pointing at: what does motec have/do that others cannot match?

I think the question we need to ask here Leroy, is why do you hate power FC so much?

10 hours ago, Birds said:

I think the question we need to ask here Leroy, is why do you hate power FC so much?

i dont hate it. I just think its poor value for money. I dont get how so many second-hand ones sell on SAU. I struggled to sell my GTiR one because nobody wants them (even though they can be used on any FWD/AWD SR20), and they're discontinued too.

They're archaic. They're from a generation of japanese products that required you to have a $2000 Defi gauge setup to monitor/display information that almost every ECU can do itself now. The Autronic I've switched to now is still pretty old-school but reading the manual and some of the parameters that can be tweaked or programmed is pretty exciting.

I think I read someone here describing a PowerFC as a stock ECU with a piggyback unit built inside it. Sounds pretty accurate to me. 

19 hours ago, Leroy Peterson said:

whats your budget? that kind of stuff isnt cheap... LED and halo rings is one thing, full cut-n-shut Vulcans or projectors is something else.

You chasing full-professional workshop or dont mind garage/side-project stuff?

 

damn cats running wild these days. i think the hippy should be re-introduced as a control measure.

 

Not fussed who does it, as long as its a good job.

Quotes atm are around $750 to $1k,. For a dual/quad projector setup

1 hour ago, Leroy Peterson said:

i dont hate it. I just think its poor value for money. I dont get how so many second-hand ones sell on SAU. I struggled to sell my GTiR one because nobody wants them (even though they can be used on any FWD/AWD SR20), and they're discontinued too.

They're archaic. They're from a generation of japanese products that required you to have a $2000 Defi gauge setup to monitor/display information that almost every ECU can do itself now. The Autronic I've switched to now is still pretty old-school but reading the manual and some of the parameters that can be tweaked or programmed is pretty exciting.

I think I read someone here describing a PowerFC as a stock ECU with a piggyback unit built inside it. Sounds pretty accurate to me. 

They're cheap, easy to re-sell, quick to install, most Jap specialists can tune them with a quick turn around using the same base maps for similar setups..

I think it's very much a case of don't fix what isn't broken. I don't know about you and the VIP generation, but all I need an ECU to do in my car is make the engine turn. The bells and whistles, gauges, 20 sensor inputs and antilags etc. will do sfa for the performance majority of tuned street cars and that is why PFC is still popular. The requirements of most users peaked with this product.

4 hours ago, Leroy Peterson said:

i'll be sure to recommend the PowerFC to Daz for his 1000hp street car

1000hp supra is not an average street car - no matter how you try to slice it

6 hours ago, joeyjoejoejuniorshabadoo said:

For your average street car / weekend warrior you simply don't need any more than a power FC offers. Shit I didn't even bother with a hand controller

nah f**k that.
haltech FTW.
support straya.
if you dont like it, leave.
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...