Jump to content
SAU Community

Recommended Posts

9 hours ago, UNR33L said:

Exactly what I'm afraid of in a few years, government seeing everything nek minit in court for all the piracy n shit.

When I worked at a small ISP we'd get warnings all the time from all the big movie makers and have to give the customer a warning, I've been downloading movies with Telstra for 15 years never once received a letter.. clearly they just don't give a f**k. I dunno about the government though? 

Had NBN for over 2yrs. never received a letter.

1 hour ago, Leroy Peterson said:

Only works for sub-$100 transactions. I thought y'all were VWLBC?

Plus I try to avoid the few days it takes to process those transactions if possible.

You can use above $100 just have to enter pin like you would inserting it

Process delay is annoying but I think if you've entered pin it should go through straight away like inserting

2 hours ago, Leroy Peterson said:

Only works for sub-$100 transactions. I thought y'all were VWLBC?

Plus I try to avoid the few days it takes to process those transactions if possible.

Works over $100 just need to enter your pin after tapping 

I've got a ME bank debit card I use once a week with a tap, and if I use it every week once I get a free village movie voucher at the end of the month it's pretty rad considering movies cost a fortune these days to go and see :)

Edited by UNR33L

I did not know this. Interesting.
Apparently america is transitioning to PINs only and everyone is chucking the shits. VISA insisting on signing because they dont think people will be capable of remembering their 4-digit code. lol. And walmart is suing them for it. lolz.

I just use the same pin for all my cards, probably not best practice but at least I can remember it.

88e on it's way up, I predict 50 cents by end of today 

Edited by UNR33L

88e on it's way up, I predict 50 cents by end of today 

If you put that on HC you would have won post if the day and become a valuable member with 1 post then everyone would follow your shares portfolio for inspiration.
  • Like 1
1 hour ago, Spressy said:

not trying to be a nuisance, but what's the reasoning with cash only?

In the case of Mohsen it's to eliminate any paper trails thereby voiding his avenues of recourse when he inevitably pays for defective defective goods and services

4 hours ago, joeyjoejoejuniorshabadoo said:

Apple pay allows over $100 as it's thumb print ID'd

Hippy 

If some guy was paying for his petrol and fumbling his phone around trying to unlock his phone and find the app I'd be forced to jump kick him out of my way

But srs, yeah in 5 years we wont even have a wallet 

Edited by UNR33L

Double-click the home button from standby mode, it opens and confirms fingerprint instantly. It's quicker than a physical card.

I'm paid and out of the store while you're still standing there touching yourself over some lame android feature you will never need.

20 minutes ago, joeyjoejoejuniorshabadoo said:

Double-click the home button from standby mode, it opens and confirms fingerprint instantly. It's quicker than a physical card.

I'm paid and out of the store while you're still standing there touching yourself over some lame android feature you will never need.
 

Fk if I could be bothered digging up posts of you slamming Apple and fanboiing android phones

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...