Jump to content
SAU Community

Recommended Posts

250HP at wheels from APR site...not KW.

 

 

apr.JPG.8e1cdbc1b9fbe53c6e3f59268f195eb5.JPG

Edit: yes this is a GTI but they claim the same for all the E888 motors so the R S3 blah blah whatevers

 

 

That's not a mk7 and the R and gti are not the same motor. The R has a much larger turbo.

 

With the correct graph, Apr state 354hp at the wheels for the mk7 r (264kw)

Is it possible to retrieve data from the SSD? backed up the SATA drive with the dock, if I can back up the SSD I'll be set..

After that, will doing a fresh install of windows solve my boot issue, or am I gonna have to take it back to centre com?

My prediction of 88E falling post spud (a nothing event) came true

But I did not predict a small spike occurring today over a nothing update from DW essentially saying "everything is going fine"

The short term reactions to long term investments never cease to amaze me. The buyer behavioir in a nutshell is "everything went as expected in the day to day operations of a company today, time for me to buy in".

14 minutes ago, Leroy Peterson said:

hey Leigh, I have one these lying around if you want it cheep for one of your many motorbikes.

https://ecliptech.com.au/shift-i/

No need brah I got one of these bad boys laying around too 

https://www.mxstore.com.au/p/Trail-Tech-Suzuki-DRZ-RMZ-250-450-Silver-Vapor-Com/75-301?gclid=CjwKEAjw3KDIBRCz0KvZlJ7k4TgSJABDqOK71ezh5hqTPUGrwJC3S8UyMNZoUCoNCzm7o7_rqEGYQBoCCx3w_wcB

16 minutes ago, Birds said:

My prediction of 88E falling post spud (a nothing event) came true

But I did not predict a small spike occurring today over a nothing update from DW essentially saying "everything is going fine"

The short term reactions to long term investments never cease to amaze me. The buyer behavioir in a nutshell is "everything went as expected in the day to day operations of a company today, time for me to buy in".

If shares were easy to predict everyone would be a millionaire 

17 minutes ago, Leroy Peterson said:

hey Leigh, I have one these lying around if you want it cheep for one of your many motorbikes.

https://ecliptech.com.au/shift-i/

how do you install it?

my current shift light is not giving me much joy

19 minutes ago, UNR33L said:

If shares were easy to predict everyone would be a millionaire 

If everyone were a millionaire our dollar would be so inflated that your Falcon would be worth a few mil.

Reactions are usually easy to predict, events not so. Knowing the former can give you a bit of an advantage.

Brah call MSI tech support, sounds pretty bricked if you can't get into BIOS. Probably needs a motherboard replacement done by one of their techs. 

Or if you are baller enough just buy a freshie, get your MSI one fixed then sell it when you get it back. 

Ric must be a real POS - how often you actually use it? :P don't you get a laptop through work anyway? 

1 hour ago, UNR33L said:

Ric must be a real POS - how often you actually use it? :P don't you get a laptop through work anyway? 

Not often lol, it's pretty clunky but does the job 

I have an X1 Carbon for work

1 hour ago, dezz said:

Yeah I'll call em just wanna back everything up first if they're gonna wipe it in the process..

Any way to backup the SSD?

If it's physically removable then yeah you can put it in a caddy / usb cable and grab your stuff.

If it's part of your motherboard soldered on then nope (MSI probably have ways though) (or if it would actually boot you can run software off a USB to clone the disk.. but yours won't boot so yeah..)

Edited by UNR33L
/remove home made porn before someone else sees it

That stuff is stored on a separate drive
If it's physically removable then yeah you can put it in a caddy / usb cable and grab your stuff.
If it's part of your motherboard soldered on then nope (MSI probably have ways though) (or if it would actually boot you can run software off a USB to clone the disk.. but yours won't boot so yeah..)

Is that another dock I need, or are they the same pin set up as a normal hard drive...?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What are you planning to do specifically?  I would be very surprised if you need to learn any math for these 'few builds' you have planned for the future.
    • I transferred from full time service to Army Reserve, so I still have access, work has been super keen to get me in to work in the OPS realm, so just turning up to use the gym......and ovens, isn't causing any issues, apart from me needing to keep on telling them that I won't be doing any reserve days until I get my joint in Goulburn sorted  Basically I can now work whenever I want, for how long I want now, and it's all tax free Next time we have some fires or floods you might see me covered in mud, or cutting sick in some plant equipment cleaning up, the Reserves love getting in the news, LOL
    • Final finish outcome of 80°c was typical to the pics, I've turned the oven down to 50°c and will pick them up after the gym tomorrow  The before and after difference was amazing, the wrinkle paint has covered all of the casting marks completely It did take a couple of hours to key it all and get in all of the crevices, but, for me it was time well spent for the final outcome, but I have all the time in the world to do it at the moment  Ended up with 4 coats, each sprayed at different angles to get optimal coverage and thickness As for the fixtures and intake box thingo that hasn't made it, the supplier is apparently posting the fixtures, and, are now sending a different CAI that is in stock The replacement CAI is actually better than what I originally ordered, but will require a pod filter that locates under the front bar, still serviceable, but it basically removes the whole OEM filter box and ducts into the front bar, so filter cleaning will require ramps and the removal of some front bar undertray, not a war stopper, just some ramps and an additional 10 minutes work every few months From looking at it it is made from alloy pipe from the throttle body, through the CAI hole in the rad support, then right turning under the bar, luckily the wrinkle paint was on special and I got 2 cans for $30ish, so the alloy will get the same wrinkle treatment as the intake manifold, hopefully it turns up soon, either way, the car will be getting booked in soon, if the parts aren't here, I'll just get MX5 Mania to " make it work"  
    • I'm so glad base security is so high. I see they stopped some random codger from being able to just wander in off the street... 😛   PS, intake looks good!
    • So far so good, another hour and their done
×
×
  • Create New...