Jump to content
SAU Community

Paying It Forward: R32 Edition

GSX-R35

By GSX-R35,
in United States

 Share

Recommended Posts

GSX-R35 Community Regular

GSX-R35

Posted
Posted

Hello ladies and gentlemen. If you own an R32 here in the US you probably already know that it's not exactly the easiest car to own and maintain largely because of a lack of widespread resources and info here in the land of apple pie and easy gun ownership. I know from my own experience that I would have had a much harder time getting my R32 GT-R registered if it hadn't been for the assistance of some wonderfully helpful JDM car owners here in my state of Arizona. Since then I've started my blog 23gt.blogspot.com to help spread info about JDM car ownership in the US to prospective and current owners but I can't possibly answer every question of course.

So, here's what I'd like to do – if you own an R32 or other JDM imported car in the US I'd like you to contact me if you'd be willing to help others out if they have questions about their own cars that they are importing or have already imported. Since registration and ownership situations can vary greatly from state to state I'd like to compile a list of owners who can help someone out if they have trouble, preferably someone who lives in the same state or at least in the same part of the country.

There would be two situations you would probably be called on to help:

  1. Someone has a car on the way or already here but needs help getting it registered.

  2. Someone needs help finding a good shop locally to get their car inspected or fixed.

I may contact you to help with other issues but only if it's appropriate.

Email would be the preferred contact method but if you have an alternate way you'd like to give (such as PM on a forum) that'd be great too. What would basically happen would be if someone contacts me through my blog or a forum I go to, or if I see a forum post asking for help you would then get an email from me asking if I can share your contact info with that person and extend an offer to help them out. I'd just like you to share your knowledge, I don't expect you to do anything financial or anything like that and won't hold you to a standard – just the fact you're willing to help another person out is enough.

So what'll happen would be something like this (this is just an example mind you): I see someone on SkylineOwnersAnonymousAndOnlineDating.Com who posts “Hi! My name is Stacy and I'm an ex-porn star and I just imported an R32 Skyline but the DMV won't let me register it even after I flashed the clerk! Helps me plz!”

You'd then get an email from me saying “Hey, have you seen this girl Stacy with the R32? She's hot! Here's some links to her vids! Oh., and you wanna give her advice on getting her car registered?”

Only after you give me the okay would I then share your contact info, discreetly by the way so you don't get more emails from Nigerian princes and male enhancement vendors (I won't just post your email publicly – I'll either post mine and ask them to contact me or send a PM).

So if you'd like to participate in this charitable endeavor and help the Stacys of our country then please contact me by PM, email me at 23gtblog(at)gmail.com, or post in this thread how I can contact you. Here in Arizona, I have someone already on board besides me but more people would be appreciated of course. I know SAU doesn't have a lot of activity from US owners right now but I hope I can get some interest from here as well.

Thank you very much,

Oliver

P.S. Please participate only if you have a 100% legally imported JDM car. This isn't because I have anything against quasi-legal cars but it's for your safety and the other person's. If your car isn't quite legal then you probably shouldn't advertise it by sharing your contact info with others. At the same time it's not good if prospective owners get advice that's not quite on the up-and-up. Thanks.

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/458553-paying-it-forward-r32-edition/
Share on other sites
  • 2 months later...
GSX-R35 Community Regular

GSX-R35

Posted
  • Author
Posted

Genius post, I'm located on the east coast of the united states and currently trying to source an R32 GTR. I've bookmarked your blog in preparation for what to expect!!!

I hope you find the blog helpful then in your search and subsequent ownership! :)

  • 1 month later...
B-Turbo Enthusiast

B-Turbo

Posted
Posted

I recently have purchased a skyline. I live in New York.

I bought my car from a dealer in Richmond, VA.

www.Japaneseclassicsllc.com

Since I got my car from this dealer I did not have to do any importing or all that jazz. I simply went emailed them to get the car, called to make an appointment for a test drive, and went down to seal the deal. This was in no way different then buying any other car.

The guys I got my car from are a fantastic group of people. I have nothing but good things to say about them. The process was simple and stress free. It was a pleasure to do business with them. They even work with a financing company!

If anyone wants other info just pm me.

?

  • 5 months later...
  • 2 weeks later...
HarrisRacing Proficient

HarrisRacing

Posted
Posted

Patrick Harris

In Lafayette Louisiana.

My brother owns a shop in Scott Louisiana about 3 minutes off of I-10. I'm SURE he or I could help fix your skyline after doing mine!

His shop is Harris Automotive Services, Scott, LA.

  • 2 years later...
  • 4 months later...
  • 1 month later...
Hcr32typem Enthusiast

Hcr32typem

Posted
Posted (edited)

I'm Dan and I have a 92 GTSt Type M from Connecticut. Mechanic by trade and spent a lot of years in the performance world. Still learning about these cars but I'm always happy to jump on and help if someone needs the assistance!

U4KP6sw.jpg

My car for reference! In the process of doing a "Type MR" conversion which was an extremely limited run of GTSt made by the Kanagawa Dealer for the 35th Anniversary of the Skyline. It was essentially a standard GTSt with a GTR grille, hood and rear wing with a special badge on the trunk but otherwise unmodified. Apparently it was limited to 200 cars.

Edited by Hcr32typem
  • Thanks 1
SeanR32GtSt Community Regular

SeanR32GtSt

Posted
Posted
Just now, Hcr32typem said:

I'm Dan and I have a 92 GTSt Type M from Connecticut. Mechanic by trade and spent a lot of years in the performance world. Still learning about these cars but I'm always happy to jump on and help if someone needs the assistance!

Ever had an issue with the car not wanting to HOT start? After some driving turn car off, go into store come back and start it and have to hold the throttle down for few seconds to keep it running. 

Hcr32typem Enthusiast

Hcr32typem

Posted
Posted (edited)
49 minutes ago, SeanR32GtSt said:

Ever had an issue with the car not wanting to HOT start? After some driving turn car off, go into store come back and start it and have to hold the throttle down for few seconds to keep it running. 

Actually I had a similar problem. Itd cold start fine but then hot start like crap. 

Is your car running very rich? Do you smell excess fuel when it does start?

My issue ended up being the fuel pressure damper at the front of the rail (read: against the firewall. RB rails feed from the firewall and exit through the front and the fuel pressure regulator). The diaphragm had failed and fuel was being forced through the vacuum lines and into the intake before the throttlebody.

 

R19b1qZ.jpg

Pull this line off and see if there's an fuel in it.

Edited by Hcr32typem
SeanR32GtSt Community Regular

SeanR32GtSt

Posted
Posted
22 minutes ago, Hcr32typem said:

Actually I had a similar problem. Itd cold start fine but then hot start like crap. 

Is your car running very rich? Do you smell excess fuel when it does start?

My issue ended up being the fuel pressure damper at the front of the rail (read: against the firewall. RB rails feed from the firewall and exit through the front and the fuel pressure regulator). The diaphragm had failed and fuel was being forced through the vacuum lines and into the intake before the throttlebody.

 

R19b1qZ.jpg

Pull this line off and see if there's an fuel in it.

Check hose after engine is hot or cold?

Hcr32typem Enthusiast

Hcr32typem

Posted
Posted (edited)

Eitherway, you should either have a small puddle or you'll smell fuel residue

Mine youd have to crank the engine and put the peddle to the floor to "catch" the engine or it would die and you have to crank it for an extended period (15 seconds or so)

Edited by Hcr32typem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By GTSBoy · Posted

      Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Bireley_32
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Bireley_32 · Posted

      Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • MBS206
      Starting again

      By MBS206 · Posted

      The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...