Jump to content
SAU Community

Recommended Posts

I'd be concerned, but having said that it is a skyline...... This is what we have to deal with. Power that is making is fine, don't worry. Compression, yes.

So can you please tell me what race pace said about Power FC V's Haltech as I was looking to go a Haltech, as the car I purchased had a PFC, and the AFMs are maxed and I have E85 local.

Thanks!

The power is an issue for me because I was hoping for more like 450hp.

I'm in two minds about compression given that it's a higher kilometres engine anyway and a rebuild would have always been in my future.

With the spares that come with the car I could go a long way to covering the cost of a rebuild and then I'd have a fresh motor.

The other part of me thinks I could just as easily pass on this and wait until something better comes along. There's still things like the box, diffs, etc to consider

Chris said the Haltech had more features but the PFC ran car better, especially on standard ignition setups and was happier without a crank trigger setup than the Haltech.

Edited by ActionDan

Just received this video.

I have no idea what a "cold" engine should show on a thermal gun but I'd think it would be higher than 23 degrees.

I did mentioned to him that cranking it that many times can give a false positive as the cylinder has a chance to keep building pressure.

He's going to have another go when his brother drops by so he can video the comp gauge building pressure on each stroke for me.

https://www.youtube.com/watch?v=Sf5_UfXRlkc

It's one thing to buy a car to drive and build up at your own pace and another to buy one expecting to do a rebuild.

If you budget extends as much then it's worth considering or even worth renegotiating the price slightly if you decide to stay with this one, covering yourself when you rebuild.

GL bud.

The question is whether it needs a rebuild or not. The guy at Godzilla seemed like a bit of an ass to be honest. To then see these comp test results be different doesn't fill me with confidence he did a good job testing it.

I will have another mechanic look it over.

I would have to think that between the 2x Rims, the HKS Catback Exhaust and the RB30 short block there'd have to be 6-7k there, that goes a long way "IF" the car needs a fresh bottom end.

I might stretch and insist I want the PFC also as he was contemplating keeping that.

Well I just got some bad news...

Jap history came with this auction report and these comments. I'll await his summary but I don't think there's any mistaking the front end damage, especially if it implies an oil leak that was not minor.

I realise that the repairs may have been done well, but its still of concern.

"Unfortunately photos of the car at auction are no longer available since the auction took place so long ago now, just the auction sheet itself and related meta-data still exist.

You may have some questions in regard to the grading which is uncommon - a zero grade was awarded to indicate that the vehicle required mechanical repairs (although not noted in detail - the oil leak noted is presumed not to have been minor). Given the other noted repairs which are structural in nature, the vehicle would have received an R grading had it not been for the oil leak issue.

We'll be in touch again shortly with the registration certificate result and summary. "

post-23873-0-02172600-1442355497_thumb.jpg

Edited by ActionDan

No idea of the condition, but it does seem like a good base to build, local-ish is also a step in the right direction

http://www.gumtree.com.au/s-ad/lynbrook/cars-vans-utes/r34-gtr/1087776979

All the best with your search, this is one of my fav threads at the moment, only second to the R34 picture thread

Edited by squareznboxez

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
    • Mine is all -12, I’m running a dry sump in a billet block though 
×
×
  • Create New...