Jump to content
SAU Community

Rb25 Rebuild

TehNef

By TehNef,
in Engines & Forced Induction

 Share

Recommended Posts

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

what is wrong with the motor?

I'm assuming you have a RB25DET NEO, they're pretty solid motors and will spin 400kW ish without any real drama.

There are a few fellas here making stupid numbers on their stock motors and pound them often on the track too

Link to comment
https://www.sau.com.au/forums/topic/459726-rb25-rebuild/#findComment-7604185
Share on other sites
89CAL Grand Master

89CAL

Posted
Posted

Forged internals are pretty

20120928_1753571_zpsmop0ufmw.jpg

20130202_1945561_zpso8djwxnk.jpg

But not necessary in most cases :P

I wanted to do a rebuild and make mine able to handle anything i threw at it if I decided to change things later on so thast why I went forged.

I'd focus more on ARP studs etc to be honest.

It really depends on your intended use, your budget and your power goal

Link to comment
https://www.sau.com.au/forums/topic/459726-rb25-rebuild/#findComment-7604212
Share on other sites
TehNef Rookie

TehNef

Posted
  • Author
Posted

brought it as a project nothing was wrong internal wise, had a bit f a leak though and im still on my p's so cant drive it till august next year and i wanted to build something quicker, but rather do it all right the first time then having to pull it out and do shit to it again, anyone recommend doing anything specific like stage 2 cams, keep side mount or go front etc... shit like that, also replacing the fuel pump with a walbro (anyone run one?) and going with the fg GT35R turbo (thoughts on turbos?)

Link to comment
https://www.sau.com.au/forums/topic/459726-rb25-rebuild/#findComment-7605549
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • foney
      Cheap Gtr For Sale

      By foney · Posted

      BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Rezz
      First time Skyline owner

      By Rezz · Posted

      Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
×
×
  • Create New...