Jump to content
SAU Community

Recommended Posts

yeah definitely not lol i'm not that silly.i'll take the fuel line off and see if anything comes out. i'll probably just change the fuel lines but im not sure how to go about that.where would i get the hoses from etc. i assume i follow the fuel line back from the fuel rail and it go's under the car back to the fuel tank ? i'll google it tomorrow just having a guess for now

i just thought of a use for the fuel injection cleaner.if i disconnect the fuel line at the rail would it clean the lines and just spray out at from the fuel line ?

lol..anyways. im going down to supercheap auto soon to pick up some oil. should i get some fuel lines while im there ?

i had a look on there site.

this is what i found http://www.supercheapauto.com.au/online-store/products/RSP-EFI-Fuel-Hose-5-16-Per-Metre.aspx?pid=104897#Recommendations

how many metres would i need?

Getting the car to run, and getting the car to run right are completely different worlds, too.

Even if this car was running, and SEEMING to be okay, you'd still absolutely get it checked to confirm what seems okay, is actually okay.

As someone said, fuel, air, spark. It's gonna be a guessing game as to which part of the system isn't functioning but every system is pretty much testable.

As ben said... Car off the road for 3 years, and NOW super impatient to get it going?

3 years.

^This.

If I had a GTR sitting on my lawn, i wouldn't of been able to let it sit for 5 mins without trying to work out what was wrong with it. You've had the patience of an ignorant donkey for 3 farken years, a little longer isn't gonna kill you. You should really try and get someone with some sort of car knowledge to give you a hand b4 you make a shit situation even shitter. Good luck with it, I hope u get it running without too much hassle. Just being real.

impatient might of been the wrong word.over excited is more the wording i should of used. im just excited to get it going and i really think it wont be too much trouble.i think the battery was a main culprit for it not starting. fully charged it wasnt even at 12 volts. its sitting just above 10 on the gauge in the car.and it drops quite a bit when cranking. i tried cranking it earlier with the jumper charger battery ( with the fuel plug disconnected ) and it sounded like it wanted to start even with no fuel supply. didnt have time to check for spark and test the fuel injector plugs with a noid light,will do on sunday though. next step is to get a good battery!! and a new air filter since the one on there is filthy and wouldnt be helping.

next week im going to flush the petrol tank and with some injector cleaner but take of the fuel line at the rail so it doesnt go through the injectors, then i'll put on the fuel filter, change the oil and oil filter. chuck in some spark plugs etc. and try crank it. with fresh petrol obviously. then ill check if its getting fuel pressure.

also have a basemap on the ecu since i updated the firmware on it with the laptop,had a gtr basemap on there. also noticed when the key is turned to on that that tacho go's up in rpm then drops down. feature of the ecu? lol never seen it do that before.

really don't think its going to be that hard to get it started.

i'll take some videos of each step i take too( testing spark etc.)

also checked all the fuses,in the engine bay and under the dash and all were good.i thought there was fuses in the boot but i could not find them at all !!

Going to buy a new battery this Sunday or Monday. Really appreciate some input. I've been looking at some batteries but not sure which ones will fit since it needs small terminals. Best one I have found that will fit for sure is an optima yellow top D51R-T1D51R-T1 but is it really worth paying 225 dollars when it's only 450cca? Is it enough? I like to be on the safer side and get a slightly bigger one if possible. Let me know

im pretty sure thats the battery that i have now..and its shithouse lol its only 330cca .i would rather pay an extra $100 and get a good battery. i want one with a decent cca rating that will fit. i'll pop into battery world on monday but i want to get some ideas of good batteries and good prices for those batteries. dont want to pay more much then $200 if possible. $250 is the limit to spend on a battery

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all, I’ve just finished fitting the timing belt on my RB25, following the standard procedure: rotate the crank twice, release the tensioner, then tighten it down. The belt feels tight, and you can see that clearly in the picture below I’ve heard some people say it’s actually better for the belt to be slightly loose rather than too tight, as excessive tension can lead to snapping. So that’s in the back of my mind. What I’m seeing is this:  • At idle, the belt looks fine.  • But when cranking and especially when revving (around 3–4,000 RPM), there’s a momentary flap/flex or flicker in the belt, which I’ve tried to capture in the video. So my question is — based on what you see, is this slight belt movement something you’d consider normal, or am I just being OCD? Could this amount of movement cause sync issues? Or is it just a harmless bit of flex under load?   from what I know belt flap and flex is expected when crank spins up and pull cam with it Would appreciate any thoughts or similar experiences.     IMG_7656.mov IMG_7657.mov
    • I've replaced the front brakes of my NA to 324 brembos and 350z calipers: i'm going for 225/40-18 up front and 245/35-18 in the back. I have Rays 7.5*19 ET35(225/35) in the front with 5mm spacers otherwise the calipers "lock up/ won't rotate". When i use the calculator i come up with 8*18 ET30 for 225/40...... but not sure i get problems with the calipers. Anyone riding around with 18 inch. that can confirm "that it'll fit"? In the back it's 7.5*9 ET30 (245/30) with the 5mm spacers, but there is no problem with the standard small brakes, so i want to take 8.5*18 ET25 (245/35).
    • Lol.. but then.. always come back to a JDM..
    • Glad to hear. If possible, get your tuner to check air's to make sure everything is still where it should be.
    • The problem with FB/Insta/Reddit etc comments relating to cars is simple. You get to ask a question once, and get one round of replies. For things that can actually be answered in a few lines of text, once, it's fine. After 6 hours, your original question is lost to the void. There are no follow ups, additional questions, anything. No project car is ever such a simple list of questions to ask. You need discussion.
×
×
  • Create New...