Jump to content
SAU Community

Recommended Posts

Another track day completed. This time at Winton with @ActionDan 's club. Was a good day out. Drove there and back 500km+ blitzed my old pb by 4.5 secs, happy days.

Ended up with a best of 1.37.75 unfortunately this wasn't registered on natsoft as it was the last lap of the day and the red light to signal end of session was on when i crossed the line. Red light came on with 2 corners to go. I knew i was on a pb lap so i kept going. 

Car ran good, no dramas to speak of, was pretty solid all day.

Some racechrono data 
Screenshot_2018-05-07-20-47-41-05.thumb.png.6b743fb511267802adcb6f491f6000c9.pngScreenshot_2018-05-07-20-47-52-39.thumb.png.60cc56a53ffa29a200d6a636e75eb338.pngScreenshot_2018-05-07-20-48-28-26.thumb.png.c0c0348a42f3fe0cef9f26e3c22891cd.png

Managed to get up to 195 km/h down the relatively short straight, that was in 4th gear reving its guts out, surprised it didn't hit the 7800rpm rev limit considering the 4.3 diff ratio which worked beautifully around the boob section and ensured i was at the right revs.

Screenshot_2018-05-07-20-49-52-18.thumb.png.46c9821606b6ed205a1bcacb3d43f419.png

 

Apparently, i finished 2nd in class which was good. That was with my natsoft recorded time of 1.38.62 First was 1.38.43 if my final lap had counted i could have been first, oh well, shit happens, lol. Ultimately, very happy to be in the 37's, the goal was a 39.9.

Video coming soon.

  • Like 2

@Dose Pipe Sutututu This one is for you. Golf R with intake, exhaust and tune. 200 awkw, has brake upgrade, coilovers, some neg camber dialled in, track alignment and Nankang AR-1 tyres.

 

Golfs are gay and should be used to go to your local golf club, chopped brah. Skyline 4 eva. 

 

 

  • Like 3

Oh yeah, on the way home, about 5 minutes from home actually i had a squirt with an A45 AMG, first rolling, A45 got left behind by a fair margin. Then he wanted to go at the lights (on a private road obviously), antilag engaged with the Ar-1 still on, the boat launched perfectly and left the A45 in it's wake. Skyline with antilag and r specs > A45 with launch control. Was a good way to cap off an already excellent day. 

  • Like 5
12 hours ago, admS15 said:

@Dose Pipe Sutututu This one is for you. Golf R with intake, exhaust and tune. 200 awkw, has brake upgrade, coilovers, some neg camber dialled in, track alignment and Nankang AR-1 tyres.

 

Golfs are gay and should be used to go to your local golf club, chopped brah. Skyline 4 eva. 

 

LOL your car has like 15~20k worth of mods!

 

1 hour ago, Dose Pipe Sutututu said:
LOL your car has like 15~20k worth of mods!

 

To be honest, the car owes me less than 20k total, i bought the car for 10k to start with. Most of the parts used to buid it where 2nd hand, other than the turbo $850, injectors $800, dump pipe $170 and wide band $270. Everything else was cheap cheap ebay, gumtree, sau specials. I can list everything if you really want.

 

Thought id post that vid with the golf up since you've said on many occasions that a lightly modded golf r would chop a modded boat. Winton suits the golf better than the boat too, its not really a horsepower critical track, although horsepower allowed me too walk away down the straight.

 

Theres definitely a couple more seconds to be had at Winton, need to properly sort and set the suspension, height adjustment, corner weight etc.

 

hahaha damn, I've seriously done something wrong then :(

Can't even get under 1m8s at Wakefield Park where a Golf R can do the same time... new setup should be ready for July battles, I hope that changes my mind.

Try softening up your front ARB to reduce understeer?

hahaha damn, I've seriously done something wrong then [emoji20]
Can't even get under 1m8s at Wakefield Park where a Golf R can do the same time... new setup should be ready for July battles, I hope that changes my mind.
Try softening up your front ARB to reduce understeer?
1 min 8 is no slouch. Interested to see the new setup go. Should blow golfs out of the water and scare many hondas, lol.

As far as ARB's, it could help but the car is sitting so high it still rolls a fair bit. More camber will help but street car brah.

I think its about time i cough up some dollars and take it to a professional to set up properly and advise a course of action. It does handle quite well at Sandown and ok at PI but Winton shows its inadequacies.
1 hour ago, admS15 said:

1 min 8 is no slouch. Interested to see the new setup go. Should blow golfs out of the water and scare many hondas, lol.

As far as ARB's, it could help but the car is sitting so high it still rolls a fair bit. More camber will help but street car brah.

I think its about time i cough up some dollars and take it to a professional to set up properly and advise a course of action. It does handle quite well at Sandown and ok at PI but Winton shows its inadequacies.

perhaps make a splitter Bill, that would help so there's no need to reduce the ARB hardness

  • Like 1
perhaps make a splitter Bill, that would help so there's no need to reduce the ARB hardness
That would definitely help and is on the cards as well as the other stuff. Just got to work out if i do it with the current bar or use a stock spare one i got.

The only thing that bothers me about all this is the list of things that are getting removed and refitted for track days is growing.

First it was just wheels and tyres, then boot lid and wing, roll cage cross brace, rear seats etc. Now we're talking about splitter and possibly front bar. Things we do to go fast... Lol
  • Like 1
hahaha damn, I've seriously done something wrong then [emoji20]
Can't even get under 1m8s at Wakefield Park where a Golf R can do the same time... new setup should be ready for July battles, I hope that changes my mind.
Try softening up your front ARB to reduce understeer?


The question is, what generation of Golf R that you can’t keep up with?
 

The question is, what generation of Golf R that you can’t keep up with?

 

The answer to that for me is none that I've come across yet. 

The 33 has beaten a few 7's with apr kits at Sandown as well as some Audi's and A45's.

 

Yes, surely there is some quicker vw's, Audi's, mercs out there but same with skylines.

 

The point is, you still need to throw a decent amount of $ at them to go quick and they're not insanely quick out of the box, although much quicker than a bog stock skyline and much easier to live with as a daily.

 

 

 

 

 

 

 

1 hour ago, Count Grantleyish said:

 


The question is, what generation of Golf R that you can’t keep up with?

 

MK7, they're fast man!

Going to upgrade the missus car to that when we get back from our trip! Will probably take the daily to the track more than the boat LOL

The answer to that for me is none that I've come across yet. The 33 has beaten a few 7's with apr kits at Sandown as well as some Audi's and A45's.
 
Yes, surely there is some quicker vw's, Audi's, mercs out there but same with skylines.
 
The point is, you still need to throw a decent amount of $ at them to go quick and they're not insanely quick out of the box, although much quicker than a bog stock skyline and much easier to live with as a daily.
 
 
 
 
 
 
 


Yep, these euros are dear as poison to go fast.

MK7’s are pretty capable for what they are considering how held back they are from the factory although same can be said for all cars.

Also it’s down to how brave the driver is.
MK7, they're fast man!
Going to upgrade the missus car to that when we get back from our trip! Will probably take the daily to the track more than the boat LOL


Yep, they goes alright.


Yep, these euros are dear as poison to go fast.

MK7’s are pretty capable for what they are considering how held back they are from the factory although same can be said for all cars.

Also it’s down to how brave the driver is.
Agreed on all points.
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...