Jump to content
SAU Community

Recommended Posts

Next month I'm about to pull the pin on some 2860R -5 but have some question about the marriage between the turbos and my engine. The old bird has done 197,000km and she runs quit well. She is stock and only has an exhaust and PFC as mods. I'm just wondering if these turbos are going to kill the engine or are there supporting mods I can do to make the union work without a catastrophe or is there a safe boost range to work within?

Link to comment
https://www.sau.com.au/forums/topic/461537-save-my-rb26/
Share on other sites

Its all in the tune. If you are worried you can do a compression and/or leakdown test but there is no way you can get more power from your engine without increasing loads. The amount of boost is irrelevant - either you want more power or you don't. Plenty of people have increased the power on their unopened engines - some last for years some don't. The only thing you can do usefully is use quality synthetic oil and get a really good tune.

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/461537-save-my-rb26/#findComment-7650236
Share on other sites

Its all in the tune. If you are worried you can do a compression and/or leakdown test but there is no way you can get more power from your engine without increasing loads. The amount of boost is irrelevant - either you want more power or you don't. Plenty of people have increased the power on their unopened engines - some last for years some don't. The only thing you can do usefully is use quality synthetic oil and get a really good tune.

Pretty much what Kiwis4t said.....

If the leakdown and compression test come back good, some good oil and a good safe tune is all you need. (and supporting injectors, fuel pump etc)

Edited by GTRPSI
Link to comment
https://www.sau.com.au/forums/topic/461537-save-my-rb26/#findComment-7650251
Share on other sites

fuark, mine's a mint Edward Lees R33. Shows 149xxx but body says it has about 350xxx.

Rust was hidden with sound deadening, motor had leaks on rear main seal, front main seal, cam covers etc.

Did all the maintenance work and now sees 23 to 25psi err day stock motor and gets raped on the track, albeit it's a shit box GTS-t so yours being a GTR you have no worries.

Link to comment
https://www.sau.com.au/forums/topic/461537-save-my-rb26/#findComment-7650407
Share on other sites

Who's Edward Lees?

awesome car yard in Sydney that can supply any car with the kms you want lol.. they simply wind the clock back to what you want and tell you they've found this mint car from Japan LOL

I personally didn't buy my rust bucket from them, but the previous owner did!

Link to comment
https://www.sau.com.au/forums/topic/461537-save-my-rb26/#findComment-7650420
Share on other sites

I'll take kiwi and johns advice on board Thx for the suggestions.

The reason for my concern is that I read somewhere that -7 and -9 place less stress than the -5 and that the smaller turbos would be a better choice for an engine that's travelled further. Don't know if the information is good but by the sounds of things seems as though ppl here are quite optimistic with the strength of the RB 26 lashing out the power regardless of Km's.

Link to comment
https://www.sau.com.au/forums/topic/461537-save-my-rb26/#findComment-7650446
Share on other sites

I'll take kiwi and johns advice on board Thx for the suggestions.

The reason for my concern is that I read somewhere that -7 and -9 place less stress than the -5 and that the smaller turbos would be a better choice for an engine that's travelled further. Don't know if the information is good but by the sounds of things seems as though ppl here are quite optimistic with the strength of the RB 26 lashing out the power regardless of Km's.

MotiveDVD guys have their stock motor R32 GTR making over 450kW at all fours with only new headstuds and a head gasket.

These RB motors love it.

Link to comment
https://www.sau.com.au/forums/topic/461537-save-my-rb26/#findComment-7650454
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...