Jump to content
SAU Community

Recommended Posts

Hello,

I have a r32 gtst with the rb 20det.

My car has a rough idle/shake. When the car is started it has a rough idle/ shake but goes away after driving. The car drives smoothly and accelerates fine. If the car is driven a little hard, when it comes to a stop, it has the rough idle/shake.

About three weeks ago the weather started to become colder (17 degrees celcius). The car developed the rough shake/idle at start up. It was bad. Also as I found out later, a cylinder was missing. The power of the car was down. At the same time I believe I got a bad batch of gas.

The car had a weird coil pack set up that the previous owner had installed. The coil packs were mounted next to the windshield wiper motor. There were orange spark plug wires connected from the coil park to the spark plugs. All of the tuners that I went to said that the coil packs would have to be returned to the stock set up before they would tune the car.

I had some extra coil packs and had them tested at Nissan. They said that the coil packs were good to go. I did a compression test and the readings from the cylinders from the front of the engine to the back was: #1 140 psi. #2 135 psi, #3 135 psi, #4 135 psi, #5 140 psi, and #6 135.5 psi .

I changed out the coil packs and the coil pack harness. All cylinders worked after that. But the rough idle/shake was still there as well but the power had not returned fully to the car.

I changed out the spark plugs to HKS Iridium's M35's (had the same in there before). When taking out the old spark plugs, a friend mentioned that one of the spark plugs looked as if the cylinder it was in was running lean.

After changing the spark plugs the rough idle/shake went away some. I used a fuel cleaner, Seafoam, to clean out the fuel system incase some of the problems are fuel related. I think it may be fuel related.

The car's power came back and the car began to drive much more smoothly and quickly. The rough idle was pretty much gone(going away) When starting the car, it was smooth. But the weather is colder now and when I start the car it has the rough idle/shake and when the car is driven a little hard, it comes back when the car is stopped.

The weather is now in the 10-14 degree time. Winter is coming.

So could this be fuel related? Are my cylinder psi readings good? The car has about 138,000 km on it. I am using a GTR fuel pump and I changed the fuel filter to a new one earlier this year.

Could the fuel pump be going out?

Edited by yoshiii335
Link to comment
https://www.sau.com.au/forums/topic/461583-engine-problem-maybe-fuel/
Share on other sites

Compressions are ok.

Have you tried this: http://www.sau.com.au/forums/topic/110431-diy-aac-valve-cleaning-idle-reset/

(not sure if it applies to RB20DET)

Maybe time to pull the injectors out to clean and test.

Compressions are ok.

Cool.

Think it could be the pump?

I am about two to three months out from either tuning this engine or changing to a rb25 or rb 26. I want to make sure this engine is working. until then.

Edited by yoshiii335

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...