Jump to content
SAU Community

Recommended Posts

Now that we've gotten in the extended oil sump for the new RB26 that's going into my R32 I'm trying to figure out what parts we'll need to swap the front diff to the new pan. Can anyone tell me if there's a rebuild kit or install kit for the RB26 front diff and where to get them?

Thanks in advance for your help.

Now is the time to replace it with a Quaife LSD

http://www.sau.com.au/forums/topic/440091-rebuild-gtr-front-diff/

but if you decide to keep the open diff you can just put new seals in or go to town with all new bearings. I have a list of the bearings with Nissan Part numbers but I can't remember what modfel GTR they fit. If you quote just one part number to a Nissan dealer they should be able to tell you.

post-49463-0-93291900-1451778245_thumb.jpg

Front diff bearings and seals text.docFetching info...

  • Like 3
  On 02/01/2016 at 11:48 PM, KiwiRS4T said:

Now is the time to replace it with a Quaife LSD

http://www.sau.com.au/forums/topic/440091-rebuild-gtr-front-diff/

but if you decide to keep the open diff you can just put new seals in or go to town with all new bearings. I have a list of the bearings with Nissan Part numbers but I can't remember what modfel GTR they fit. If you quote just one part number to a Nissan dealer they should be able to tell you.

Thanks for the info! I'm not sure my budget has room for a front diff upgrade currently but I'm definitely considering it.

Doing mine at the moment, that picture shall be useful for me also, thanks.

Its a hard one with the diff upgrade if the budgets are marginal. It is a big chunk to add do your budget, but then again its another few thousand bucks to pull the engine to do it again in the future.

What are you doing with the car?

Circuit, street (runs or hills) or drag?

How much power?

Either way, change it now.

If it's anything that is going to involve RPM launches - so drag, and over 300rwkw/400rwhp... Then you absolutely MUST change it now. If you've spend big $$$ on a after market sump, you do NOT want the stock front diff blowing as it will take out some/all of the front sump if it fails badly enough which is anyone's gess. It happened to me and a few others over the years, so by spending now and doing it right, you'll thank yourself.

Its not "so much" needed for circuit but honestly, the improvements you get from doing it are IMO, one of the best value vs gain mods EVER. I've said it before that if I had my time in a GTR again I would do the following

- Small turbos/basic 300rwkw setup.

- Diffs, both

- Transfer Case

Rather than rebuilding motor and doing for 550hp+ as the driving experience/speed of the car is just so greatly improved it's outta this world levels of difference.

I would say Nismo for Drag and Quaife for circuit seems to be the consenses. That said I used my Nismo to blistering effect in 80-120km/h motorkhana based stuff, suited my driving style.

  • Like 2

Dont forget that most aftermarket diffs are a little larger in casing size and wont fit into the front diff case without some grinding in the right areas, best done when its all apart when its easier to get in there with a die grinder and to clean out all the alloy shavings.

We went drag direction and installed a Cusco setup as a one way diff.

But yes, 100% - you will NEVER regret a front diff upgrade - as long as you have done the rear.

Simple some of the best mods you can do to a GTR if you are aiming to enjoy the driving of it

  • Like 1
  On 13/01/2016 at 9:55 AM, R31Nismoid said:

But yes, 100% - you will NEVER regret a front diff upgrade - as long as you have done the rear.

Simple some of the best mods you can do to a GTR if you are aiming to enjoy the driving of it

Even without doing the rear, it was one of, if not the best mod I did. Front, rear, transfer was my order. It just gets better every time!

Thanks for the replies everyone. I ended up getting a Nismo LSD. Although the Quaife is the better unit for road course no one carries it here in the US and at over twice the price of the Nismo I couldn't justify it anyway since my R32 will mainly be a weekend/show car and will probably only see the track on a very rare occasion. Either way, I figured if the Nismo was good enough for their JGTC cars then it'll do fine in my R32 lol.

  • Like 1
  • 3 weeks later...
  On 15/01/2016 at 4:00 AM, GSX-R35 said:

Thanks for the replies everyone. I ended up getting a Nismo LSD. Although the Quaife is the better unit for road course no one carries it here in the US and at over twice the price of the Nismo I couldn't justify it anyway since my R32 will mainly be a weekend/show car and will probably only see the track on a very rare occasion. Either way, I figured if the Nismo was good enough for their JGTC cars then it'll do fine in my R32 lol.

Look at my build for pretty detailed pictures. It should be noted that I cut my own shims, but buying factory would have been easier (beware there are a LOT of factory shims).

Here's a link

http://www.sau.com.au/forums/topic/447384-r32-gtr-build-in-usa/?p=7559306

  On 02/02/2016 at 2:50 PM, HarrisRacing said:

Look at my build for pretty detailed pictures. It should be noted that I cut my own shims, but buying factory would have been easier (beware there are a LOT of factory shims).

Here's a link

http://www.sau.com.au/forums/topic/447384-r32-gtr-build-in-usa/?p=7559306

Thanks for chiming in. I saw your thread before and that's partly why I got the Nismo LSD since like you I couldn't find a better alternative that was available to someone in the US. I'm waiting to see what my friend finds when he dives into the swap but yeah it's amazing how many sizes of shim Nissan lists for the LSD lol.

  • 4 months later...

FYI. Now that my car is on the road and I have about 1000 miles on it, I'll comment on the Nismo Diff.

I LOVE IT!

Super quiet, after about 500 miles of street driving any noticeable chatter has gone away. There is a slight drag when pulling into driveways or at low speeds and extreme steering angles, but that thing grabs like a cat on carpet on throttle. You'd better have the wheel pointed where you want the car to go on throttle because it almost pulls the car in the direction when it hooks. Incredible unit for the money.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
    • Thanks buddy. I thought it was a server storage thing. 馃ぃ
    • Perfect! Thanks for this, both look like great options!
    • but deep down inside once you Skyline, you always Skyline
  • Create New...