Jump to content
SAU Community

Recommended Posts

Qld Raceway Sprint Track - 59.30 sec

Qld Racway Clubman Track - 1:02.25 sec

Qd Raceway National Track - 1:25.61 sec

Can anyoen clarify the number of circuit formats you guys use up there...it seems i have made a mess of the times as i didnt realise there was 3?!?!?! Is there more?

This was from a *very* long time ago:

SAU Nickname: 46n2

Car Make and Model: R32 GTST

Circuit Name: Qld Raceway, sprint circuit

Lap time: 1:07.78

Modifications

Engine:RB20DET

Power: dyno'd at ~110rwkw a few months before before hitting the track

Suspension: HKS non Adjustable coilovers, Front Hollow Swaybar

Other Mods: None - stock right down to the exhaust :D

Tyres: Ventus (cheapo rubber that came with rims) - useless with no grip

Brakes: RB74 Front, rear standard, rotors standard

First time with new setup

SAU Nickname: Stealth

Car Make and Model: R33 SII GTST

Circuit Name: Qld Raceway, sprint circuit

Lap time: 1:00.95

Modifications

Engine:RB25DET

Power: dyno'd at 347hp atw

Suspension: Tein Adjustable coilovers, Nismo Swaybar

Other Mods: Race pipe, GT35/40 int w/g turbo, intercooler, PwrFC,

Tyres: Bridgestone Potenza RE540s

Brakes: bendex ultimates Front, RB74 rear, rotors standard

__________________

Updated Winton time - 4.5s off my previous PB to a 1.35.2. Very happy. (updated original post)

Mostly due to upgraded brakes and modified transfer case. Anyone with a GTR that's keen on track work the upgrades to the transfer case is one of the best mods I have ever done to my car.

ahh I got to knock 1 sec of my wakefield time today, but I am cheating now :D

SAU Nickname: Duncan

Car Make and Model: 32 GTR N1

Circuit Name: Wakefield

Lap time: 1.10.2

Modifications

Engine: Standard N1 spec

Power: tba

Suspension: some jp coilovers

Tyres: Dunlop DZ02G

Brakes: standard

Body weight: 1460 wet

ahh good question that was Andrew that has made transfer case mods, I assume more clutch plates? personally i reckon the controller acheives the same end but I would have to try em back to back.

How is your additional block ventilation mod going?

andrew what did you do to the transfer case? and mind telling me what pressures (HOT) to run the RE55 tyres :D

I was at wakefield on saturday.... however had oil catch can issues! hmmm back there on the 11th to try again!

how do we go about timing for the no speed limit days?

cheers....

ahh good question that was Andrew that has made transfer case mods, I assume more clutch plates? personally i reckon the controller acheives the same end but I would have to try em back to back.

How is your additional block ventilation mod going?

Duncan guessed right here. I've never used the controllers but I have been told there are some advantages of the transfer case mods over the controllers - how marginal the difference is I'm not sure so like Duncan could only tell with a back to back trial. But god damn through the tight stuff it's made a huge difference.

Ben - I run my RE55's at 30psi hot.

:rofl:

duncan now all you gotta do is drive a 31 round the track. here is chris' effort

SAU Nickname: Chris

Car Make and Model: HR31 GTS-X

Circuit Name: Wakefield

Lap time: 1.12 (something decimal pointish)

Modifications

Engine: R32 RB20DET

Power: 160kw from last count

Suspension: HD Coilovers

Tyres: turanza or some e30 stuff

Brakes: R33 4-pistons at front, R32 at rear

Body weight: 1400

Actually Chris was doing some great laps considering the drives a POS 31 :D but the tyres he was using were dunlop D01J. Hope he makes it to the drift nats in Adl OK :)

I was out there last monday, Powerplay had a private track day and I took the opportunity to give the car a final shake down before the state champs at Oran Park this weekend. It ran great except for the cracked rear rotor so I should be out there OK.

ahh good question that was Andrew that has made transfer case mods, I assume more clutch plates? personally i reckon the controller acheives the same end but I would have to try em back to back.

We found with just the controller, it would get some slip towards the end of a race and the oil temps would climb rapidly. No slip with the additional plates, last the whole race and lower transfer case oil temps all the time.

I took the opportunity to give the car a final shake down before the state champs at Oran Park this weekend

:goddam: I had better ring around and warn everyone.

:)

PS; Only kidding :innocent: good luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...