Jump to content
SAU Community

R32 Gtr Shell


Recommended Posts

As the title states I have an R32 GTR shell for sale.

All it needs is some coilovers (that I can source) and some space savers to make it a roller.

It’s a late model 1994 and is complied and can be registered (I have all the paperwork including the latest PPSR certificate).

Chassis has done 216,000km (I'm rounding up here)

Only one owner in Australia being me J and anyone who knows me understands that I have really looked after this car.

Right I will start off with the bad.

Car has had an accident which was repaired Japan and the right hand side rear quarter panel was replaced.

I cannot confirm how the accident occurred or when (except it did not occur in Australia) as I was not as thorough as I am now with these cars when I acquired it.

The sills have seen better days as I believe it was put on a truck by a forklift – I will post pics of sills when I can.

It has had some rust in some areas especially at the front of the chassis (near the wheels) which I have treated to the best of my ability link to my build thread is here http://www.skylinesaustralia.com/forums/topic/416016-antz-1994-r32-gtr-project-restoration/?view=findpost&p=6677763

I replaced the driver’s side door because some nitwit left a rivet tool in the door which chipped at my window

I never replaced the lock with the original because I used my alarm to open my doors but I still have the original door which will also form part of the sale.

It has a small bullseye chip on the windscreen which has been filled in.

Paint is ok however; the bonnet could do with a respray as it has started to crack

There are two small tool dents in the rear guards which I’m sure can be fixed easily

It will not come with the following:

Headlights / Blinkers

Front bumper

Intercooler,

No ECU (although I do have the standard one)

Front Brakes

Engine and gearbox

Oil Cooler

Exhaust

fuel tank / fuel pump (has been modified to fit suit fuel system in boot)

Interior is complete (except for the radio which is aftermarket that I’m keeping sorry fellas) and in excellent condition

No bubbles in the dash and no broken vents

Comes with pristine nismo floor mats Recaro drivers bucket seat

Has almost new whiteline front and rear sway bars with HD links and hard race front and rear adjjustable camber arms

Rear taillights are led (look cool) well there is more good stuff

IMG_6206_zpsw3lkfuoc.jpg

IMG_6212_zps9aayxjes.jpg

IMG_6209_zpsg3hexm2y.jpg

IMG_2507_zpscotlakjv.jpg

IMG_2528_zps1d40217a.jpg

Joy riders welcome :P

Time wasters can EAD

Located on the Gold Coast

$11,000 negotiable

PM or call 0404 006 580

Thanks,

Ants

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Nice! I hope it all works out. At least now you know the track as well and can build from last year. Looking forward to see your car in action again.   Ooof. Godspeed!
    • We let the engine warm up as much as it could while stationary and with the head check plugged into the open radiator but I see you're point that it would be difficult to get it to the point where it begins to overheat. The overheating issue only began after the initial problem with the empty radiator. Until then I had driven the car almost daily without any issues (with the gktech fan etc.) I'm beginning to suspect butters may be right and that it's a head gasket issue, just difficult to find the time to work on the car lately. And whether or not it's even worth doing the head gasket etc. on the 20 when I am, extremely slowly, building a 25 for this car.
    • Yeah, alright, I take it back. I hadn't bothered to compare the terminal numbers - they're not the same. I was working on the presumption that it was the "small plug" half of the HICAS CU because it has the same plug as the small plug on the HICAS CU. And...the drawing says "Refer to Super HICAS system circuit diagram" which seemed to place it firmly in the world of HICAS, not non-HICAS.
    • You definitely have a big problem if with the adjustment screw closed up you're idling at 1200 rpm. Have you verified you have no vacuum leaks? No throttle shaft seal leaks? Nobody has messed with the throttle body set screws? I would love to see what Consult reports when your engine is idling that high.
    • HICAS has a much more complicated circuit diagram, for some reason the R32 GTR service manual discusses both. The HICAS module has proper 2 way communication over consult, the "EPS control unit" doesn't have any of that and only exposes a raw analog voltage for the EPS solenoid valve. It's ultimately mostly about speed sensitive steering but the non-HICAS unit also looks at the neutral switch/brake/clutch switch to adjust how it provides assist.
×
×
  • Create New...