Jump to content
SAU Community

Recommended Posts

As instructed ........

What is everyone's thoughts?

Just got my car tuned 703rwhp 524rwkw. Does anyone know the record for these turbos?
Built bottom end with 87mm pistons
2860-5 turbos
Pon cam type A
Tomei manifolds and dumps
Apexi down pipe
ID1000s and tomei fuel rail
2 walbro 400lph fuel pumps
Nismo inlet pipes and hard intercooler pipes
Custom intake pipes
AEM series 2 ecu tuned for flex fuel
4CA2765D-A61C-43E6-9DCF-9E05E902C893_zps

Edited by Jc052685
Link to comment
https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/
Share on other sites

Simply a dual 2.5" Maf-less system I built for it. I am wishing now that I used 3" as I may have left a few hp on the table. I welded 2.5" v-bands to the turbo inlets as to minimize the inlet turbulence that a couplet could induce. Took care to make sure all inlet pipe fitment was perfect.

00000000-0000-0000-0000-0000000000ED_zpsA7AF15C8-183C-4845-B030-E13041C0BC9E_zps

I personally feel that if the customer wanted to truly max out the turbos by freeing up some restriction that still exists in the inlet & charge pipe sections that I could get another 25-35whp out of them. Car is still on the factory intercooler & intake plenum after all.

These are all the performance mods I can remember.

CP pistons 87mm

Eagle rods

N1 crank

Nismo oil pump

Mild head work

BC springs/retainers

Tomei type A poncams

2860-5 turbos

Tomei dumps

Tomei manifolds

Spec twin plate

AEM ecu tuned for flex fuel

Nismo thermostat

Apexi down pipe

Aluminum Radiator

ATI dampner

Blitz cat back

Greddy cooling panel

Greddy timing belt

ID1000 injectors

Tomei fuel rail

2x Walbro E85 fuel pump

Nismo air inlet pipes

Nismo intercooler hard pipes

Powerfab intakes

Splitfire coil packs

Got a pic of the cooler, Nismo is not factory and there is two versions with one being far superior to the other

Looking at the parts list I would say the exhaust and ID1000s are the most limiting factors and would guess a realistic 400-420rwkws and give or take 130-135mph

List says Nismo cooler, factory cooler starts to measurably pressure drop from around 350kw, 500+rwkw on a stock cooler is where I call mythbusted

Nismo intercooler hard pipes

Car made 490whp on 13psi...... Mustered a 507whp pull at about 15psi but the 93 octane pump gas was the limiting factor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
    • Did you hit up the search function? R33 and greddy and cable returns this thread with some options.   https://www.sau.com.au/forums/topic/358214-rb25-throttle-body/
    • Thanks buddy.. the standard one needs to be about another inch or inch and a half longer. Thanks anyway
×
×
  • Create New...