Jump to content
SAU Community

Recommended Posts

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

if i was you i'd be taking the car to somewhere else just to do a dyno power run, as if i had spent my hard earned $$$ and changed to a turbo that can take 18psi on a rb20 and then got less power than a standard rb20 at 14psi it would make me think "WTF"...

106rwkw at 5000rpm at 16psi apparently this is as much as a hotted up 5ltr HSV (cam exhaust, cold air) on his dyno.  It was run in 5th gear.

This is a crap figure so you know I am not lying.  There was no fan so the IC wasn't working (does that make sense.)

I have also had fitted a BOV that is set to 16.5psi, the turbo I got is not ceramic so it will go to 18psi.  

Does anyone have a comment on how what dyno figures really mean.....?

I wouldn't be at all happy with that power figure!! Stock FJ makes 110rkw!!! Mate of mine with an RB20 made 197rwkw with just a VG30 turbo, FMIC and exhuast, not tuned or anything..Did u end up getting another power run elsewhere or???

at the wheels a standard r32 gtst should make 115-117kws, with a 3" full exhaust that will get around 15kw extra then add a good fmic for another 10-15kw remap the ECU to run 14psi and that will leave you with 150-160rwkw

That is exactly what I thought. I should have around 220fwkw at 15-16psi with the mods I've got.

didn't get around running it on a dyno but I found a leak. I used permatek type 3 around the leak but I haven't run it hard yet. I'll repost when I eventually get around to dynoing again.

Doing it the way he did doesnt sound at all dodgy to me, much hbetter to tune it for those conditions, then you can be sure it wont expire in summer.

Intercooler is just a heat sink in any case, even without a fan it should be ok for a single run because while the car is idling before you run its not getting any heat transferred to it so it starts cool

My stock boost FJ20 made 124 in shootout mode

I wouldn't be at all happy with that power figure!!  Stock FJ makes 110rkw!!!  Mate of mine with an RB20 made 197rwkw with just a VG30 turbo, FMIC and exhuast, not tuned or anything..Did u end up getting another power run elsewhere or???

how does the VG30 turbo rate on an RB25? they are steel wheel/shaft right?

whats the difference in A/R to the RB25 turbo?

how does the VG30 turbo rate on an RB25? they are steel wheel/shaft right?

whats the difference in A/R to the RB25 turbo?

Im not 100% sure on the size differences compared with the RB25 turbo, i do know that u can get two types of VG30 turbo though, one's ball bearing the other is bush bearing...Most VGs are ceramic wheel whilst u may just find one or a few that are steel, they exist but are rare as...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...