Jump to content
SAU Community

Recommended Posts

Motive-DVD-GT-R-Festival--724x1024.jpg

SAUNSW Club Entry for

2016 GTR Festival

SAUNSW has been invited by Motive DVD to have a club display displaying members cars at the 2016 GTR festival

This means you will have the opportunity to have your GTR displayed together with other SAUNSW members GTRs at a discounted rate to normal admission.

You will be part of the biggest gathering of GTRs outside of Japan ranging from R35 GTR to the Hakosuka

There will also be the following at the show

  • Drag racing
  • Go to whoa
  • Launch pad
  • Dyno Comp
  • GTR car yard
  • GTR swap meet
  • Various trade stands

​To enter these events visit http://motivedvd.com/motive/gt-r-festival/

To enter your GTR in the club display please fill out the form attatched below and email back to skylinesausnsw@gmaildotcom and pay entry as per the entry form

Event: 2016 GTR festival

When: Saturday 28th May 2016

Where: Sydney Dragway

Cost: $30

Entry Form: GT-R Festival Car Club Display Entry Form.doc

Club display is unfortunately ONLY open to GTRs but event is open to all spectators.

Spectator tickets can be purchased from here http://motivedvd.com/motive/gt-r-festival/

  • Like 1

* SAU.NSW President will be one of four Show n Shine judges. Another will be flying in from NZ - another SAU member and member of Skylines Downunder and GTR NZ - Lucas.

* SAU.NSW will have its own group of GTRs under the Club. Logistics are still to be worked out.

* SAU.NSW will have entries in the Drag I expect

* SAU.NSW will have some of its cars in the Heritage Display

* SAU.NSW might have some cars in the SnS I expect too.

So if I want the Mega Pack enrty, i just fill out the form, send the form to SAU (who will take care of the registration) and pay the $150 to jetmultimedia via paypal?

Is the club going to decide who's cars it's going to allow in its stand or anyone that enters will be in the club stand?

Anyone that enters and sends form to us is in

So if I want the Mega Pack enrty, i just fill out the form, send the form to SAU (who will take care of the registration) and pay the $150 to jetmultimedia via paypal?

Correct

Hi guys I'm new to sau, I've wanted to join for ages but never had a skyline so didn't really wanna, but not I have a nice 33 gtst, Ive never been to any car event, I really want to come to this one as I love gtr's, if I drive my skyline down, where do we park ?

Hi guys I'm new to sau, I've wanted to join for ages but never had a skyline so didn't really wanna, but not I have a nice 33 gtst, Ive never been to any car event, I really want to come to this one as I love gtr's, if I drive my skyline down, where do we park ?

Welcome to SAU!

I believe for this event (which is something we have been invited to be part of and is not a SAU NSW event), you'll be welcome to attend however entry is for GTRs only. If you drive your Skyline down you'll be in the carpark area. This may be something Motive DVD will consider but is not currently our call.

Any of our SAU NSW events however, we'd happily welcome you in any car you choose to bring with you.




  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...