Jump to content
SAU Community

Recommended Posts

While my Bora is in a million parts I've started looking for other stuff to fix.

I then leaned on a small piece of vacuum line and heard a crack and lots of airflow/sucking!

The brake booster vacuum line is brittle as hell and needs replacing. The two replacement hoses from VW are $300 so I thought I'd see if I can make my own up (car's not worth a lot, its not worth me getting OEM ones).

One end is apparently 13mm ID which could be a problem as I've only seen silicon line up to 6mm ID. This is the part that goes to a one way valve.

Can I use fuel line? Can I get some silicon line? Can I just fix the existing vacuum line somehow (cracks seem to be only around the ends of the line and not mid-way.) Looks like she's been in a bad way for quite some time and that I just made it worse.

Could I cause any probs by using non-exact hoses (ie larger or smaller ID)?

Is it easy to increase/reduse size of silicon lines?

Sanks.

Link to comment
https://www.sau.com.au/forums/topic/463951-diy-vacuum-lines-fuel-line-maybe/
Share on other sites

I've used fuel line before as a bit of a "get me home" fix and may or may not have left it on my car for months on end :woot:

In my mind it's the most durable of the hoses on a car, shouldn't be any issue - $300 for a rubber hose is a joke hahah

Fair enough. on my R32 when i put the RB25 in i used a bit of silicon rad hose from the plenum to the brake booster to get the car running and didn't have any issues.

In saying that, I can see how fuel hose could possibly collapse under vaccum but you'd really need to give it a go

any hydraulic place has rubber hose with fibre reinforced line, guaranteed not to collapse. Take your hose to them and ask, if they are any good they will have a solution for under $50 and it would be permanent.

  • Like 1

Yeah nice idea. Theres a few Hydraulic places in Mona Vale and Brookvale I can check.

Considering the cracks are only around the barb fittings, is there a tape I can use in the meantime? The lines have heat protection on all the fittings as it goes behind the engine block.

Yep amalgamating tape..........get it at Jaycar and the like. As you stretch it it sets off a chemical reaction and binds together. Stretch it heaps, if you break it then back off a little bit lol.

It is not supposed to like degreaser, but I've used it and it seems ok, maybe if its sitting in it??

  • Like 1

And one last thing, when finishing off wrapping, just stretch the tape till it breaks. Keep your thumb on the work area and it should break under it and bond in to the work area, so no loose flapping tape like you get with insulation tape.

  • Like 1

And one last thing, when finishing off wrapping, just stretch the tape till it breaks. Keep your thumb on the work area and it should break under it and bond in to the work area, so no loose flapping tape like you get with insulation tape.

Awesome, will do, thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...