Jump to content
SAU Community

Recommended Posts

While my Bora is in a million parts I've started looking for other stuff to fix.

I then leaned on a small piece of vacuum line and heard a crack and lots of airflow/sucking!

The brake booster vacuum line is brittle as hell and needs replacing. The two replacement hoses from VW are $300 so I thought I'd see if I can make my own up (car's not worth a lot, its not worth me getting OEM ones).

One end is apparently 13mm ID which could be a problem as I've only seen silicon line up to 6mm ID. This is the part that goes to a one way valve.

Can I use fuel line? Can I get some silicon line? Can I just fix the existing vacuum line somehow (cracks seem to be only around the ends of the line and not mid-way.) Looks like she's been in a bad way for quite some time and that I just made it worse.

Could I cause any probs by using non-exact hoses (ie larger or smaller ID)?

Is it easy to increase/reduse size of silicon lines?

Sanks.

Link to comment
https://www.sau.com.au/forums/topic/463951-diy-vacuum-lines-fuel-line-maybe/
Share on other sites

I've used fuel line before as a bit of a "get me home" fix and may or may not have left it on my car for months on end :woot:

In my mind it's the most durable of the hoses on a car, shouldn't be any issue - $300 for a rubber hose is a joke hahah

Fair enough. on my R32 when i put the RB25 in i used a bit of silicon rad hose from the plenum to the brake booster to get the car running and didn't have any issues.

In saying that, I can see how fuel hose could possibly collapse under vaccum but you'd really need to give it a go

any hydraulic place has rubber hose with fibre reinforced line, guaranteed not to collapse. Take your hose to them and ask, if they are any good they will have a solution for under $50 and it would be permanent.

  • Like 1

Yeah nice idea. Theres a few Hydraulic places in Mona Vale and Brookvale I can check.

Considering the cracks are only around the barb fittings, is there a tape I can use in the meantime? The lines have heat protection on all the fittings as it goes behind the engine block.

Yep amalgamating tape..........get it at Jaycar and the like. As you stretch it it sets off a chemical reaction and binds together. Stretch it heaps, if you break it then back off a little bit lol.

It is not supposed to like degreaser, but I've used it and it seems ok, maybe if its sitting in it??

  • Like 1

And one last thing, when finishing off wrapping, just stretch the tape till it breaks. Keep your thumb on the work area and it should break under it and bond in to the work area, so no loose flapping tape like you get with insulation tape.

  • Like 1

And one last thing, when finishing off wrapping, just stretch the tape till it breaks. Keep your thumb on the work area and it should break under it and bond in to the work area, so no loose flapping tape like you get with insulation tape.

Awesome, will do, thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...