Jump to content
SAU Community

Looking For Stock Parts To Clear Rwc

prgervacio

By prgervacio,
in Victoria

 Share

Recommended Posts

prgervacio Apprentice

prgervacio

Posted
  • Author
Posted

By air filter I'm assuming you need the air box ?

Yes, I meant the airbox. Actually a bit confused. I've been trying to research on legality of of pod filters and some are saying they are ok as long as they're enclosed. Any idea if that's a calid assumption

Odium Grand Master

Odium

Posted
Posted

If you're trying to get a skyline through a road worthy certificate, get a full airbox setup... They are perfect for up to about 350rwkw, so don't let anyone tell you that a POD filter is better than the standard airbox.

  • Like 1
Kinkstaah Grand Master

Kinkstaah

Posted
Posted

Technically pod is entirely legal if you have no other intake mods.

Technically even more so, emissions is not a part of RWC, so you should be able to pass a high mount T5 turbo, forward plenum, pod, fmic, 2000CC injectors and a surge tank in the boot.

But yeah, go as stock as possible[emoji14]

V28VX37 Veteran

V28VX37

Posted
Posted

I may have found a set of shocks from the wrecker. Quick question, are the R34 rear struts fork type or bush type when attached to the control arms?

GTTR34 is correct, it's fork type on the GTT.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 gtt rb25det neo timing belt kit

      By GTSBoy · Posted

      Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • GTSBoy
      braided lines for the turbos

      By GTSBoy · Posted

      For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • sunsetR33
      braided lines for the turbos

      By sunsetR33 · Posted

      I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Alright I understand. The most likely case is probably gonna be that I just keep the OEM unit in the car as long as it works.
×
×
  • Create New...