Jump to content
SAU Community

Recommended Posts

I'm looking for some advice here. I recently imported an R32 to the US. It's bone stock, has no modifications. My goals are to work on the reliability of the car as first priority, and performance as second priority.

Besides suspension, brakes, tires, I thought a reasonable place to start would be replacing the turbos. Mainly because I want to avoid any catastrophic failure. I don't have a billion dollars to spend on this project at this moment, so it's going to need to be done in stages. If I was to start with the turbos, what would be the minimum amount of other parts I would need to replace at the same time? I was thinking probably turbos, full turbo back exhaust, plus/minus an ECU. Is this reasonable? Can I get away with stock on all of the other parts if I was to do this with -7 or -9 turbos?

Thanks for any guidance!

Link to comment
https://www.sau.com.au/forums/topic/464254-advice-on-early-r32-rebuild/
Share on other sites

Replace the fuel pump as well as they are old and tend to not flow as well as they should.

You can do just those things but you will be limited to about 260kw (338 Australian horse power) with out changing the injectors as well, oh and the clutch will probably call enough fairly quickly as well

Yeah, I was thinking fuel pump too. I'd like to save money where I can, and trying to find an option cheaper than Nismo or Apex'i. The Deatschwerks 300 looks solid, but they don't make a specific one for R32. Has anyone had success with their universal? Or is there anywhere to buy and OEM pre-filter?

I know the injectors would help, but as you well know, this is how the snowball effect happens. I'm trying to decide where to draw the line on this first stage of the build. I'm already going to be out probably $5000 between brakes, suspension, turbos, exhaust, and the million fluids and filters I had to buy. Yikes.

Bone Stock, No Mods

Keep an eye on your oil pressure.

Your first catastrophic failure will be caused by oil starvation due to a failure in your oil pump.

This will be your first engine rebuild

You have targeted your turbo's expecting the ceramic turbos to fail. This will be true if you increase boost.

For your fuel pump go the Walbro and do the direct modification.

Keep your stock airbox, no need for Pods.

Freerer flowing exhaust always a good idea :)

Keep turbos under 15psi, and you shouldn't see any issues.

A nismo or tomei direct replacement pump isn't too pricey considering g it's direct fit, plug and play.

Check voltage to the fuel pump also, just had to put a direct feed wire and relay in mone due to pump seeing 10v.

Also, what have you got planned for the rest?

If you don't have the budget, don't try and cover suspension, brakes and tyres (we spell it with a y) in one hit.

Focus on what needs to be done.

One thing at a time.

Before you know it, you'll have spent more than you purchased the car for.

Thanks for the feedback guys. Plans for the car is to make it a reliable street car that can be used potentially as a daily. I am about to move to a new city for a new job, so the amount of track time I'll get in my new location is up in the air. Which is why I'm not focusing on that currently; but certainly track time will be in its future.

It has new UHP t(y)res from the dealer; not great ones, but they'll do for now. As far as what NEEDS to be done currently, brakes are at the top currently. They're shot. Probably going to stick with the Sumitomos for now because I don't want to buy new wheels for a BBK. Will go Brembo blanks and Carbotech pads.

I have a little spare cash after the brakes, fluids (all of them, yikes), filters (got a Cosworth panel filter and new oil/fuel filters) from selling the current car, so maybe I'll start with exhaust and fuel pump (anyone know a good deal on one?).

I had originally thought of doing the oil pump as the first engine work, but was told it was stupid to do that if it's currently working fine. Mainly because everyone says its stupid to pull the motor and do the oil pump without rebuilding the whole bottom end ($$$). But it seems as though with this current stock setup I have to not rev over 7000 (oil pump) and not boost over 14 (turbos), or choose which I want to fix. Eek! I'm very open to suggestions on all of the above. Don't have as much support in the US as you guys do.

Edited by ltjpunk7

If not doing motor sports, keep the motor stock for now.

Should take a quick punch on the street without problem.

Keep the tyres.

Do the fluids.

Do the brakes.

And start putting the rest aside for future problems/mods.

If you want, do the y pipe, cat and cat back exhaust, should give a nicer sound and free it a little.

Get the front top camber arms checked, the bushes are generally shot.

They get a fair bit of stress, so wear a bit.

If you want, do the y pipe, cat and cat back exhaust, should give a nicer sound and free it a little.

Get the front top camber arms checked, the bushes are generally shot.

They get a fair bit of stress, so wear a bit.

Yeah, I'm pricing out the full exhaust now. I want it to be to quiet, as I'm coming from a very loud MINI Cooper S. I picked up the HKS Silent Hi-Power for very cheap. Now working on the front two components. If I was to get the Mines front pipe, would it be wise to get the Japspeed flexible decat since there's no flex join in the Mines pipe? I've heard mixed things about the necessity of the flex in the front pipe. Or would that be too loud, and make more sense to get a high-flow cat? (and if so, any nice budget cats?)

Also, I bought my fuel pump off ebay.

Cool. There's some pretty good deals on a Walbro application (example: http://www.ebay.com/itm/Walbro-Fuel-Pump-For-89-94-Nissan-Skyline-R32-GTR-Turbo-255-/220846675040?hash=item336b7cd460:g:BKEAAOSwQItUKxHq&vxp=mtr),but I was told you really need 276 LPH and the Walbro is 255 LPH. Would this pump be good enough if I was eventually to build the car and push 450-500 whp?

And remember the GTR is a great fun car but its over 20 years old with a 2.6L engine so you won't be out-dragging Corvettes or BMW M3s!

Ha, I was prepared for that. To tell you the truth, it's probably not as quick as my MINI was. But my other car is an F30 335xi with a Burger tune, so I've got a quick car to get me through the speed freak moments. :woot:

But that one seems to be a universal kit, so I'd still have to buy a new O ring gasket, and anything else? Also, is there such thing as it flowing too freely? Would a 450 LPH be a problem on a stock motor? I have no intentions of ever going E85. Sorry, I'm a fuel system n00b. :(

Hi Silent isn't quiet lol.

Ha I know, you told me in the other thread.

But if that's the case, maybe a hi flow cat makes more sense than a decat. My only concern is that if I get the Mines front pipe that there needs to be some sort of flex in the system, which is why I was considering the Japspeed flexible decat.

Ah sorry I don't keep track of who I reply to lol. My front pipe isn't flex, it usually loosens dump pipe nuts or sends the vibrations downstream.

Yeah, I think I'll grab the Japspeed flexible decat. Hopefully that gives it enough wiggle room to keep me out of trouble.

The flex issue is between the two pipes to the turbos, not the rest of the system z as I understand it. After all the exhaust has enough play

Yeah that's my understanding too. But it's kinda crazy that some of the premier companies would make it without the flex, if it was truly that important. But what do I know, I'm just a lowly American getting into the game late.

My system is rigid (heh) so no flex in the front pipe. No issues unless I'm pounding (heh) curbs at a race track. I did break the rear dump pipe gasket after unintentionally hitting a retarded speed hump with the front pipe.

You forgot to say (heh) after hump. Giggity.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...