Jump to content
SAU Community

Recommended Posts

Not bad, much better than A1RM on the track but still gave up after 3 hard laps. Project Mu I would do about 5 laps before shit got hairy lol

Recently just bought Type D Intima pads, I'll tell you how they go after 30th May.

Wow 700C temp rating, higher than the A1RM. How do the SR go on the track?

My Intima SS's died on the hills, need some convincing to go back to Intima after that..

I have SRs. Great street pad. But I never use the brakes so I suppose I don't really test them!

  • 2 weeks later...

Not bad, much better than A1RM on the track but still gave up after 3 hard laps. Project Mu I would do about 5 laps before shit got hairy lol

Recently just bought Type D Intima pads, I'll tell you how they go after 30th May.

How do the pads "give up" after track laps??

How do the pads "give up" after track laps??

Sorry wasn't too clear, so what I mean say after 5 or so laps, the pads become ineffective at stopping the car also known as brake fade. Once everything cools down again by either doing a cool down lap or waiting for the next session then the brakes will be back to normal again until you've given them a pounding and they "give up" after x laps.

Sorry wasn't too clear, so what I mean say after 5 or so laps, the pads become ineffective at stopping the car also known as brake fade. Once everything cools down again by either doing a cool down lap or waiting for the next session then the brakes will be back to normal again until you've given them a pounding and they "give up" after x laps.

Brake fade is not the pads, that will be your brake fluid not able to handle the temp.

Brake fade is not the pads, that will be your brake fluid not able to handle the temp.

Fluid boiling is not brake fade. That's when the pedal goes to the floor and your lunch ends up in your pants.. Fade is where the pads exceed their working temperature and stop having a decent coefficient of friction.

That's pretty lucky then, because everyone else I personally know and race with all have used A1RM, all hate them, all have had brake fade, and half of them crumbled their pads.

I personally hate them, but I hate Bendix pads even more.

I agree, my A1RM's were shot after 3 laps or so of Phillip Island in the Stagea, but that is an 1800kg wagon with R34 Brembo's and 350kw.

Great pad for spirited road driving though, mine don't make any noise, and I have never had an issue on the road.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...