Jump to content
SAU Community

Recommended Posts

Hi Guys,


Up for sale is my complete bolt on Borgwarner EFR setup out of my R34 GTR. This setup is amazing but I have decided to build a 3.2L stroker so ill be moving onto a bigger turbo (9180 or so).

Most responsive turbo you can get for 450-550awkw bar none. No expense has been spared on this setup it was all custom but works together so well. If you haven't heard of the EFR before read up on them here http://www.sau.com.au/forums/topic/341890-borg-warner-efr-series-turbos

093ff25de2.jpg

fde121552a.jpg

Kit consists of


Borgwarner EFR 8374 1.05 rear. Front and rear housings have been ceramic coated black and an elbow has been welded on. Full race metal BOV cover. 
Same as this one here http://www.full-race.com/store/efr-turbos/borgwarner-efr-8374-turbo-2.html with the coatings and the fitting kit (fittings, vbands, flanges etc) is about 2600 usd before shipping and import duties.

Full race manifold T4 split pulse manifold. Absolutely amazing manifold the workmanship on it is crazy. Has also been ceramic coated black then wrapped with titanium heat wrap.
Same as this one here http://www.full-race.com/store/efr-turbo-manifolds/nissan-rb26-25-20-det-t-twin-scroll-ewg-efr-turbo-manifold-1.html.  The manifold alone would set you back 2500 usd before shipping and import duties.

All lines are 200 series braided teflon from Speedflow with fittings to suit.

4" Stainless dump pipe which reduces down to 3.5" near the bottom of the firewall and is flanged where the cat would sit.

2 Stainless screamer pipes to suit Tial MVR 44mm wastegates. These attach to the dump pipe but don't plumb back in they exit under the car a bit past the firewall. The front one was a nightmare to fab up ($900 alone on that pipe) but it's done now and works perfectly whilst still retaining factory AC and PS. Alot of time went into that run to ensure everything could still be used.

4" intake pipe with 6" bell mouth and filter to suit. Sounds amazing with the bell mouth on it.

Hot side intercooler piping from turbo to intercooler including all clamps and silicone. The kit utilises all standard holes so no cutting is required which made it a mission to fab up but I think the results speak for themselves at it looks amazing.

You can see from the photos no expense was spared here at all (I didn't think id ever outgrow it) and it looks amazing. 

The kit itself is in perfect condition in every way it just won't make the 650awkw I want out of a 3.2  All you need is some Tial MVR 44mm gates and it is straight bolt in everything else is there. I do have the gates to suit but ideally id like to keep them rather than rebuy for the new setup.

0b6538119e.jpg5610eec386.jpg


Price: 7K  A lot more than that was spent on it but I am realistic. The turbo and manifold alone would set you back more than that landed nowadays!

Pickup is definitely preferred over post considering the size of everything. I am located in Rouse Hill, NSW and don't intend on splitting anything unless I have a buyer for everything.

Thanks,

Brett / 0403858714
 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...