Jump to content
SAU Community

Recommended Posts

Hello

I found this info someone put up about different Nissan diffs.

Is this correct? http://www.nissansilvia.com/forums/index.php?showtopic=337751

I have learned from other places that having a 4.3 or 4.1 ratio diff is good to get for a rwd turbo car.  Is this a good ratio to have?

 

Edited by yoshiii335
Link to comment
https://www.sau.com.au/forums/topic/466150-questions-about-diffs/
Share on other sites

Have you got an R32 RB20DE? If so you will have a 4.1 diff already (4.111 non abs or 4.083 if you have abs.

There is no such thing as a good ratio. There is only fit for purpose. What do you want to do that you can't already?

2 hours ago, KiwiRS4T said:

Have you got an R32 RB20DE? If so you will have a 4.1 diff already (4.111 non abs or 4.083 if you have abs.

There is no such thing as a good ratio. There is only fit for purpose. What do you want to do that you can't already?

No, just checking.   Learned that 4.3 is good followed by 4.1 and some people put 4.1 on their turbo cars.

If the diff ratio I have is good already, than I want change.

 

 

That really doesn't answer the question mate.

You've obviously sat down and thought about the potential gains of a diff ratio change. What are you hoping to gain?

For what's it's worth, put a RB25 NEO in it and enjoy life.

2 minutes ago, Piggaz said:

That really doesn't answer the question mate.

You've obviously sat down and thought about the potential gains of a diff ratio change. What are you hoping to gain?

For what's it's worth, put a RB25 NEO in it and enjoy life.

What I learned is that cars with a 4.3 or 4.1 diffs are good. I learned that sometimes non turbo cars have those diff ratios to help it along.

I learned that 4.3 or 4.1 diffs are good to have in turbo cars.

 

I wasnt sure what mine is.   I am putting a Nismo LSD in mine.   I know my car is over 25 years old and the diff is most likely not working  correctly so I will put in the Nismo.

I change the diff oil once a year to help keep the diff working as well as it can.

17 minutes ago, yoshiii335 said:

What I learned is that cars with a 4.3 or 4.1 diffs are good. I learned that sometimes non turbo cars have those diff ratios to help it along.

I learned that 4.3 or 4.1 diffs are good to have in turbo cars.

 

 

Well......what you learnt is not true.

For drag racing, sure, go for a short diff ratio.  But turbos really like tall diff ratios so you can load the engine up in each gear and get a bigger run in each gear.

My R32 had the obligatory 4.3 diff in it.  When I did the RB25 transplant I put a 4.11 into it, and if I could have found a good way to do a 3.9 I would have.  3.7 was an option but would perhaps be a bit too tall.

 

And your diff oil does not need to be changed every year.  And you especially do not need to be putting LSD compatible oil in it (just in case you are) because your stock diff will be a viscous piece of poo and does not work like a normal LSD.

26 minutes ago, Piggaz said:

That really doesn't answer the question mate.

You've obviously sat down and thought about the potential gains of a diff ratio change. What are you hoping to gain?

For what's it's worth, put a RB25 NEO in it and enjoy life.

I want to have everything to help me with my acceleration as much as possible, non engine parts.

 

2 minutes ago, GTSBoy said:

 

Well......what you learnt is not true.

For drag racing, sure, go for a short diff ratio.  But turbos really like tall diff ratios so you can load the engine up in each gear and get a bigger run in each gear.

My R32 had the obligatory 4.3 diff in it.  When I did the RB25 transplant I put a 4.11 into it, and if I could have found a good way to do a 3.9 I would have.  3.7 was an option but would perhaps be a bit too tall.

 

And your diff oil does not need to be changed every year.  And you especially do not need to be putting LSD compatible oil in it (just in case you are) because your stock diff will be a viscous piece of poo and does not work like a normal LSD.

Ok, little confused, you said what I learned was wrong, but you mentioned that 4.1 is what you had and you wanted to go 3.9.  Yes I understand that 3.9, etc is good.  I wasnt saying that the shorter gears are better. Just what I learned about 4.3 and 4.1.   

So you didnt like your 4.3?   Would it be worth it to put in a 4.1?  My engine later I am looking at is going to be a 25 or 26.  Why couldnt you do a 3.9?

2 hours ago, yoshiii335 said:

So you didnt like your 4.3?   Would it be worth it to put in a 4.1?  My engine later I am looking at is going to be a 25 or 26.  Why couldnt you do a 3.9?

 

4.3 is really short.  For a pissy little engine like an RB20 that's good.  For a bigger, torquier engine like an RB25, higher gears are better.  Hence going to the 4.11 that the R33/4s had.  There wasn't a readily available 3.9 gearset available when I was building my Frankendiff, so I just used the 4.11s.

I'm sure the RB25 would pull 3.7s.  It's doing nearly 3000rpm on the highway in 5th, it could certainly use longer legs.

19 minutes ago, GTSBoy said:

 

4.3 is really short.  For a pissy little engine like an RB20 that's good.  For a bigger, torquier engine like an RB25, higher gears are better.  Hence going to the 4.11 that the R33/4s had.  There wasn't a readily available 3.9 gearset available when I was building my Frankendiff, so I just used the 4.11s.

I'm sure the RB25 would pull 3.7s.  It's doing nearly 3000rpm on the highway in 5th, it could certainly use longer legs.

Is it a pain to change to a 33/34 diff? Many things have to change?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...