Jump to content
SAU Community

R32 gtst over heat

Semih_Ozdemir
 Share

Recommended Posts

Semih_Ozdemir Enthusiast

Semih_Ozdemir

Posted
Posted
R32 gtst over heat

Hi all! 

Ive got a r32 gtst. I was driving on the free way and flawed it abit. My temp gauge it 'H' so I stopped. Had a look no leaks or anytbing. Cruised it home and was fine. Had a look at the oil and wasn't milky either. I've bought a radiator off a r32 gtr. Flushed it and re filled it with coolant. I let the car idle for 1 hr as I let the bubbles out. The temp didn't move  at all from cold. I then took it for a drive and it rose just sbit over 'C'. Is this normal 

 

Link to comment
https://www.sau.com.au/forums/topic/466743-r32-gtst-over-heat/
Share on other sites
Semih_Ozdemir Enthusiast

Semih_Ozdemir

Posted
  • Author
Posted

R_34, I have done a full service including the change of the thermostat water pump and coolant before it over heated.
The water in my old radiator was pretty brown and dirty. Could that have also been a issue?

R_34 Community Regular

R_34

Posted
Posted (edited)

Being an Iron block, the coolant need to be changed more regularly to avoid rust of the coolant galleries in the block.

The rust particles that get in the coolant tends to block the thermostat. Your symptoms (car not heating stationary and barely heating when driven) leads to a thermostat stuck open or partially open that allow too much coolant to be cooled in the radiator.

When the car overheated on the freeway the symptoms leads to a stuck closed or partially open thermostat allowing too little coolant going in the radiator.

And you say that you changed the thermostat before the overheating so I repeat : your thermostat doesn't seems to work correctly. Was it an oem unit ?

Edited by R_34
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      Before starting any work, we attempted to adjust the tune. However even after adjusting it to certain extremes like completely stopping fuel, it had no effect. What fixed it was removing the Nistune Board and installing the original EPROM instead. This immediately fixed the issue. Everything should have been fine with the Nistune Board installation, so I am unsure why it has caused a problem. The soldered connector is also properly soldered. This worked when I first got the 550cc injectors, before cleaning, but that may have been a coincidence.  We ended up not installing the fuel pump hanger (at least for now). So currently running stock injectors, stock fuel pump, stock fuel pump hanger – Well everything stock except the exhaust. Now I have around €1400 in Nistune, Injectors, and Hanger collecting dust for the time being, perhaps I'll install them in the future. For now I'll enjoy the car as is 😁 Thanks a lot for all your assistance, I really appreciate all the help you have given me.
    • Piggaz
      Why am I hitting a power wall with my stroked RB25?

      By Piggaz · Posted

      The turbo can’t be the issue. They’re proven to make much much power than you’re making. There is something in the setup that isn’t correct. - has the exhaust got any silly step downs? - what exhaust manifold?
    • r32-25t
      Why am I hitting a power wall with my stroked RB25?

      By r32-25t · Posted

      Ok, just the way you wrote it made it look like you had the stagger the wrong way around 
    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Kelford 246-A2. 262in/272ex. 
×
×
  • Create New...