Jump to content
SAU Community

Recommended Posts

Wheel fitment question

Have a 91 r32 gtst

Trying to run 18x9.5 +20 with 265/35/18 on all 4 corners. Is this going to rub like crazy?

 

Current setup is as follows:                                   17x7 +47 215/45/17 and 15mm spacer up front. 17x8 +47 235/45/17 in back 

Admin this is cross posted in the wheel fitment sticky but seems like there's not much traffic there so wanted to try a new thread to see if I could get some Info. Please delete if needed.

Link to comment
https://www.sau.com.au/forums/topic/466894-wheel-fitment-question/
Share on other sites

For what its worth I have 18x9.5 +27 at the front of mine and it needed roll and a lip to fit with 265's and it looks great, now, barely fitting.

I don't know what a R32 fits relative to a R34 (which is what I have) but I know that what I have is about as much as you can possibly ever fking get at the front of a stock guarded R34.

As soon as I read +20 I was like NOPE, and then 265 tyre NOPE x2 and then R32 NOPE x3

If you can find the differential between the two cars (or have a look at what others fit) it's good. Measure measure measure and the website will be 100% right, as it's the method I used to get the maximum tyre up front that I could.

Lol we all know the 33 was when the designers were on break...takes time to think of something good looking again after doing the 32...take a break then they came back with the 34 :O hah...To each their own everyone has different preferences but we all can't deny or at least I can't deny that one of the main reason I bought my car was for the beautiful sounds of the RB

 

allright, the Village People! 

i mean...ha fkn ha.

More like the mighty YamatoYamato_during_Trial_Service.jpg

built for battle...street battle that is.

I think you get where I'm going with it...it's a weapon, a destroyer, etc.

 

  • Like 1

Yep all of the above but they where the most mass produced skyline ever, which means plenty of cheap cars and spares available. No need for care factor. Crashed it at the track, buy roller for <1k and start again. Perfect track car.  they drive better than a 32 too but yeah they're dog ugly. 
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...