Jump to content
SAU Community

Recommended Posts

14938124_10155364309229386_2215414836612

 

2016 AGM & 2017 SAU-VIC Committee Elections
Location: The Orrong Hotel - 709 High St, Armadale

The 2017 SAU Vic elections will be held via AGM at the November Club Meeting on Tuesday 15th of November 2016
At this meeting, the new Committee for 2017 will be elected the annual report and financial position of the club will be presented.
All Committee positions are up for voting and nomination.
However it will only be the Executive Committee who gets voted in on the night of the AGM.
The Executive committee will then pick the general committee as they see fit from the members who are nominated here.
Nominations can only be made by financial members of SAU-Vic.
If you would like to be involved on the Committee, please nominate yourself. If you think someone else would be great in a Committee role - please nominate them.
For a nomination to be valid it must be seconded by a current Club Member and the person must accept the nomination.
Don't be scared - this is a great way to get more involved with your club. The Committee is currently structured as such:
Executive Committee roles:
President
Vice President
Secretary
Treasurer
General Committee roles:
Social Events
Motorsport Events
Again, this is a great way to be a part of your club. All current financial members are eligible.
All committee members have to stand down and be re-nominated and re-elected - so everyone has the ability to be involved.
Please post any queries or nominations in this thread.

Role Descriptions

Executive Committee roles:

President
This is the clubs leader. This person is responsible for the clubs "public" face appearance.
Their responsibility is to ensure the club is heading and following the direction that the members want.
They should also show good leadership examples to other committee members and delegate tasks to the general committee.
The President should endeavour to run all of the monthly general meetings.

Vice President
This is the clubs second in command role. This person is responsible for day to day running of the various "departments" of the club.
They act as a fill in for when the President is absent from meeting, events and other appearances.
They also cover any absences for any decision-making requirements and processes.

Secretary
Responsible for all club mail, notices, memberships, member inquiries, member questions and bulletins.
The secretary should also track our various club affiliation agreements (insurance etc) and ensure all of the club information is up to date and correct.
The secretary should also handle all memberships add/changes/deletes

Treasurer
The treasurer is responsible for the clubs trading funds and bankroll.
It is their responsibility to ensure funds for events, purchases, stock, merchandise, deposits etc is handled correctly.
All money transfers, transactions, purchases need to be logged and recorded for our regular balance checks and yearly reviews.
This person has direct access to the SAU bank account and financial data.
This person is called upon also when cross planning events and new ideas to ensure adequate funds and capacity is available.
As we are non profit car club this role is very important and all steps must be taken to protect the clubs money.

 

Link to comment
https://www.sau.com.au/forums/topic/467204-2016-agm-2017-commitee/
Share on other sites

I would love to opportunity (if I'm nominated and elected) to work alongside this years committee through 2017.

So my Nominations are -

Vice President - Simon Henman

Secretary - Robyn Ryrie

Treasurer- Anna Schulze

  • Like 1
On 12/10/2016 at 10:53 AM, Tony Olsson said:

2016 AGM & 2017 SAU-VIC Committee Elections
Location: TBA

The 2016 SAU Vic elections will be held via AGM at the December Club Meeting on Wednesday 9th of December 2015

 

Don't you mean 2016?

 


At this meeting, the new Committee for 2016

 

Don't you mean 2017?

 

 

  • Like 1

And welcome to the new/old exec committee for 2017.

President - Tony Olsson
Vice President - Simon Henman
Treasurer - Anna Schulze
Secretary - Robin Ryrie

We hope to make 2017 a big a fun year for all our members!
Stay tuned for what 2017 will bring!!!

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry, just assumed that talk of coloured pads meant EBC red/green/yellow/shit stuff. I don't know the DBA pads, but it's a reasonable bet that they will be OK. DBA make good stuff generally. Those 4000 series rotors I linked to are very good. I may well replace the RDA rotors I have with those when required.
    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
×
×
  • Create New...