Jump to content
SAU Community

Recommended Posts

14938124_10155364309229386_2215414836612

 

2016 AGM & 2017 SAU-VIC Committee Elections
Location: The Orrong Hotel - 709 High St, Armadale

The 2017 SAU Vic elections will be held via AGM at the November Club Meeting on Tuesday 15th of November 2016
At this meeting, the new Committee for 2017 will be elected the annual report and financial position of the club will be presented.
All Committee positions are up for voting and nomination.
However it will only be the Executive Committee who gets voted in on the night of the AGM.
The Executive committee will then pick the general committee as they see fit from the members who are nominated here.
Nominations can only be made by financial members of SAU-Vic.
If you would like to be involved on the Committee, please nominate yourself. If you think someone else would be great in a Committee role - please nominate them.
For a nomination to be valid it must be seconded by a current Club Member and the person must accept the nomination.
Don't be scared - this is a great way to get more involved with your club. The Committee is currently structured as such:
Executive Committee roles:
President
Vice President
Secretary
Treasurer
General Committee roles:
Social Events
Motorsport Events
Again, this is a great way to be a part of your club. All current financial members are eligible.
All committee members have to stand down and be re-nominated and re-elected - so everyone has the ability to be involved.
Please post any queries or nominations in this thread.

Role Descriptions

Executive Committee roles:

President
This is the clubs leader. This person is responsible for the clubs "public" face appearance.
Their responsibility is to ensure the club is heading and following the direction that the members want.
They should also show good leadership examples to other committee members and delegate tasks to the general committee.
The President should endeavour to run all of the monthly general meetings.

Vice President
This is the clubs second in command role. This person is responsible for day to day running of the various "departments" of the club.
They act as a fill in for when the President is absent from meeting, events and other appearances.
They also cover any absences for any decision-making requirements and processes.

Secretary
Responsible for all club mail, notices, memberships, member inquiries, member questions and bulletins.
The secretary should also track our various club affiliation agreements (insurance etc) and ensure all of the club information is up to date and correct.
The secretary should also handle all memberships add/changes/deletes

Treasurer
The treasurer is responsible for the clubs trading funds and bankroll.
It is their responsibility to ensure funds for events, purchases, stock, merchandise, deposits etc is handled correctly.
All money transfers, transactions, purchases need to be logged and recorded for our regular balance checks and yearly reviews.
This person has direct access to the SAU bank account and financial data.
This person is called upon also when cross planning events and new ideas to ensure adequate funds and capacity is available.
As we are non profit car club this role is very important and all steps must be taken to protect the clubs money.

 

Link to comment
https://www.sau.com.au/forums/topic/467204-2016-agm-2017-commitee/
Share on other sites

I would love to opportunity (if I'm nominated and elected) to work alongside this years committee through 2017.

So my Nominations are -

Vice President - Simon Henman

Secretary - Robyn Ryrie

Treasurer- Anna Schulze

  • Like 1
On 12/10/2016 at 10:53 AM, Tony Olsson said:

2016 AGM & 2017 SAU-VIC Committee Elections
Location: TBA

The 2016 SAU Vic elections will be held via AGM at the December Club Meeting on Wednesday 9th of December 2015

 

Don't you mean 2016?

 


At this meeting, the new Committee for 2016

 

Don't you mean 2017?

 

 

  • Like 1

And welcome to the new/old exec committee for 2017.

President - Tony Olsson
Vice President - Simon Henman
Treasurer - Anna Schulze
Secretary - Robin Ryrie

We hope to make 2017 a big a fun year for all our members!
Stay tuned for what 2017 will bring!!!

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...