Jump to content
SAU Community

Recommended Posts

Ok, here's the situation. A good friend of mine is buying a new car, that has had nearly every modification on the planet done to it. He has asked me my opinion of whether he should buy it or not, whilst i do appreciate it's a great car, i couldnt say that it's what i'd really recommend for him to do - or something i would do myself, as he's previously had 2 other fully completed cars which have gone bad for him (not that all completed cars go bad) and he's always wanted to start off fresh.

I dunno, i feel that building up a car, doing your own big or small modifications and little touches here and there is what makes it YOUR car? This certain car is soon to be in some magazines as the owner has basically completed the project, so i think allot of people will always look at it as so and so's car.

I myself have always bought stock (or as close as possible to stock) to build up to scratch, and basically never let a workshop touch mine unless it's serious tuning or something i have no idea about so i feel inclined to give my friend the opinion that is he should buy something closer to stock and build to represent himself as the car build up journey is always the most fun (well sometimes not!! haha).

I know that he does want to have a car that represents who he is, i do think he's a little scared of.. how should i put this... "driving a slow car to begin with" if you know what i mean, as he always seems to want to chop everything the easy way. Eg, buying a car with instant huge hp.

I do believe that my opinion will influence his decision to buy or what not, as he keeps asking me if he should do it or not, i don't want to be a prick friend and give my buyist advice.

What do you guys reckon?

p.s yes, i am bored at work haha.

Link to comment
https://www.sau.com.au/forums/topic/46742-bought-not-built/
Share on other sites

Its nice to build up your own car with mods, your own touch etc.. but its ALOT cheaper to buy one already done, plus less stress, but also less fun...

depends what he wants, to spend more money to build what he wants and learn along the way, or to just have a nice already built car to drive..

I love my car, but if i had the chance to go back, i'd be tempted to buy one that had been modded already, but with what i want.

Link to comment
https://www.sau.com.au/forums/topic/46742-bought-not-built/#findComment-948135
Share on other sites

I reckon it saves a lot of headaches, and in the long run, he'd be saving a HUGE amount of money.

If you add up the amount of money that it costs to do all the "fully sik" mods to a car, it comes to a small fortune.

If you buy a car that has already had everything done to it, there's no need to spend any more $$ on it.

Link to comment
https://www.sau.com.au/forums/topic/46742-bought-not-built/#findComment-948421
Share on other sites

why go through the "oh i wish it was faster" soon as you get it.. when if already modified it will be faster or handle better than other stock cars to begin with.. all it can go from there is even faster. Most of the "basics" are a little boring anyhow if you ask me (bleed valve, exhaust system, etc). You save a heap of money.

Link to comment
https://www.sau.com.au/forums/topic/46742-bought-not-built/#findComment-948535
Share on other sites

Sorry, I dont respect a guy i know who bought a fully worked tx3.  

The guy couldnt even tell me how his boost controller worked or how to adjust his bov.

:) i think these guys are funny. I've enjoyed modding my own car, wouldn't have it any other way really.

-rb25

Link to comment
https://www.sau.com.au/forums/topic/46742-bought-not-built/#findComment-948675
Share on other sites

The only problem I see in buying an already highly modded car is that it would have been driven hard. Why would the seller have done the mods in the firt place? To go faster.

If the seller is a good car respecting person (you would think so driving a modded car) and lets it warm up before caning it, uses good oils etc. Then I don't see a problem, unless possibly the seller knows that there is a major problem with the car that the buyer might not pick up.

I wouldn't really care if it is known as the other person's car, stick some different wheels on it, and hey presto it's now 'yours' :)

Link to comment
https://www.sau.com.au/forums/topic/46742-bought-not-built/#findComment-948827
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...