Jump to content
SAU Community

Recommended Posts

r33 RB25 whining

Hey guys,

Recently bought an r33, pretty standard beside a FMIC, exhaust and a pod filter., but it is making this weird whining/metal sort of noise whenever you accelerate. I cant get a good video of it but i found someone who managed to, but dont visit the forum anymore so i cant ask them what it was!

Video is here

First turbo/import ive ever owned and my knowledge is pretty small when it comes to cars, and for the life of me i cant figure out what the sound is. Car still drives fine, boosts fine (no gauge yet but should be arriving tomorrow) but the noise is really annoying and can be heard over the engine while driving.

Any ideas? cheers

Edited by Aestysu
Link to comment
https://www.sau.com.au/forums/topic/467958-r33-rb25-whining/
Share on other sites

8 minutes ago, GTSBoy said:

Wait.  Is the noise independent of you twirling the steering wheel?

Nothing to do with the steering, its pretty much purely when i accelerate, and gets louder the more i give it.

Could be sitting in neutral hands out the window revving the car and it happens. 

Probably timing belt since that gets whiney and noisy if: 1- the belt is a gates racing or similar. 2 - is too tight. 3 - probably both. Take off the top timing belt cover (after you carefully remove the CAS) and tell us what you see. I'm guessing a blue belt.

Pull ancillary belts one at a time. I'm putting money on power steering pump or alternator bearing.

Remember: Fan belt also drives water pump so don't run the car too long with this one off

Edited by 89CAL
Extra Info

thanks guys ill have a look hopefully tomorrow, ran into another issue gotta fix that first.

was driving, then all of a sudden lost all power, and car starts hopping. pretty much undriveable and just jumps every few seconds in bursts. it idles and revs alright in neutral, and also does reverse fine, but as soon as i use the accelerator it just hops around. thinking coils misfiring or TPS?

ok so didnt fix the new issue and seems to be worse now. Car turns over and starts, then pretty much instantly stalls, if i manage to start it, it doesnt want to rev past 2500, at first though it was coils/spark plugs but didnt fix it, then found the 2500 limit, so im thinking air sensor.

Cleaned out the maf, didnt do anything, let the car idle while i packed up and stalled, and still wouldnt go past 2500. going to try a new one and hopefully that fixes it otherwise im stumped.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...