Jump to content
SAU Community

Recommended Posts

fuuark that, big cams are gay on a stock motor.. I would go big cams if I had a built motor, solid lifters, cnc ported head, blah blah blah and rev it's mum to 10k rpm witha  sequential box.

But nah.. it's a stocker heap of shit.

Goal: 400kW stock bottom end.

  • Like 2

mateeeeeeeee I love bunnings :)

Will be making a front splitter from marine ply.. will be solid, flexible enough and won't produce any "flutters" which can occur with shitty aluminium stance splitters. When there's enough air movement and it starts to flutter the entire splitter would rip off. Good explanation:

Flutter is a dynamic instability of an elastic structure in a fluid flow, caused by positive feedback between the body's deflection and the force exerted by the fluid flow. In a linear system, 'flutter point' is the point at which the structure is undergoing simple harmonic motion - zero net damping - and so any further decrease in net damping will result in a self-oscillation and eventual failure. 'Net damping' can be understood as the sum of the structure's natural positive damping, and the negative damping of the aerodynamic force. Flutter can be classified into two types: hard flutter, in which the net damping decreases very suddenly, very close to the flutter point; and soft flutter, in which the net damping decreases gradually

 

shhuuuuuuuuu baby, from what I gather the G3SAT will dose like a bawse  (from watching Jason Ferren's R31 Drift Wagon).

Brah plenty of brake fluid left ulleh, when ize put new pads in dat brake fluid will be le tits. 

(brake fluid low because of worn brake pads and air in the ABS system from when I did the Brembo brakes up front, was full till I kicked off the ABS a few times then bleed some fluid and never bothered to refill it)

  • Like 1
7 minutes ago, admS15 said:

Maybe time for bw ts 8374? Will then be the ultimate le siet bok. Ultimate efames as well ulehemoji3.png

This guy... I agree with this guy!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • How many of you guys run the synchro os giken set and at what power? Do you then also use the billet plate?  How is it launching with it, any dragy times from 0-60? 60ft?
    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
×
×
  • Create New...