Jump to content
SAU Community

Recommended Posts

No real update to my build thread, because it's a shit build.

Doesn't have the following:

  • Emtron
  • Borg Warner EFR
  • Pierburg Fuel Pumps
  • ID injectors
  • Race Pedigre

Only runs shit parts such as:

  • Haltech (with no additonal boxes)
  • Walbro pumps
  • Bosch Motorsport injectors

In other news, looking for someone to respray the R33 shit box. Not a GT-R so no need for a hectic respray as it will get used on the track. Something of an OEM finish would be great around Sydney, my budget is about $5k but of course happy to pay a little more if able to get the rear guards cut and new slightly wider guards (from a different car or aftermarket) welded on.

I'm around the Cabramatta area, so anything near by would be good. Anyone got suggestions? I might pop into 2SUS for a chat and use that as a starting point/benchmark.

  • Haha 1
13 hours ago, WantGTR said:

pick one on Hollywood Drive brah

Any of your mates used them before? I know there's a few. Some dodgy looking some look half decent.

56 minutes ago, Dose Pipe Sutututu said:

Any of your mates used them before? I know there's a few. Some dodgy looking some look half decent.

i used to use Hollywood body repairs years ago when the asian dude owned it. it changed hands and has since shut down i think. Precision Autobody Repairs look like they do good work.

Its not in the area however Bellevue Bodyworks in Carlton do really nice work. A close friend has had his car resot'd there and they have done some small jobs for me in the past. Any further work id definitely be taking it to Bellevue Bodyworks.

^

Cheers bro! Will go for a drive around a few shops in the shit box in a few weeks and have a chat to all of them. Looks like the R33 might end up looking less of a shit box and looking more like a well maintained dated old car with cheap shit parts on it.

Nothing too exciting, however got the Nz Wiring Trigger kit working. Turns out the Haltech Elite patch loom is wired to only receive the 120 degree input from the CAS. Took me a while to work that out with Matt from Haltech and Geoff from NZ Wiring.

Kudos to both, top dudes!

Some non-interesting footage of the trigger error count & engine running smoothly on the new trigger

 

  • Like 1

My idea of running smoothly and yours are two different things ?

Whats your arming voltage set to currently? Also i thought geoff was making the swtich to hall effect sensors?

41 minutes ago, iruvyouskyrine said:

My idea of running smoothly and yours are two different things ?

Whats your arming voltage set to currently? Also i thought geoff was making the swtich to hall effect sensors?

hahaha.. well it's running smoothly enough LOL

I have it roughly as follows:

  •        0 RPM - 0.18volts
  • 1000 RPM - 0.9 volts
  • 2000 RPM - 1.5 volts
  • 3000 RPM - 2.0 volts
  • 4000 RPM - 3.0 volts (onwards is all the same)

** edit

I'll start driving the car around and pull logs so I can get the right arming voltages, also not too sure if Geoff will be moving to a hall effect sensor, the reluctor although "old school" is actually quite reliable

  • Like 1

New alignment ✔
New tyres - Nankang AR-1 in 265/35/18 ✔
New rotors - DBA4600 T3 ✔
New pads - Intima Type-D v2.0 ✔
New buckled guard - ?

Car does drive nicer and relaxed the caster a bit, had 8.5 degrees before which was a bit too extreme. Has 7 degrees now, and less strain on the LCA bushing.

Guard buckled when I was rolling them to get the car to clear the 18x9.5 +20 wheels with 265mm section tyres all round.

20181106_133037_HDR.thumb.jpg.270664401ae3de55946c8edfdeebd8c6.jpg

 

  • Like 4
13 minutes ago, ActionDan said:

Should've just bolted on some small flares you spud. 

Car is looking good otherwise. 

 

 

Should have not built the car lol

13 minutes ago, admS15 said:

Have you driven it on the street with those. The noise.. So when is it's maiden voyage to wakefield in it's new improved form.

A little bit yesterday, they seem to be pretty grippy when not even warm and the noise is still much quieter than how the car was before with cooked wheel bearings all round.

Has all new wheels bearings, new traction rods, new ball joints, new alignment so yeah - it's pretty quiet. Should be exciting once it's running properly, just spent all of yesterday night working out why the A/C wasn't triggering and when I earthed the input pin going into the ECU the FICD relay kept clicking and why that pin was actually drawing current. Turns out I didn't connect up the A/C thermister and for whatever reason that affects the entire A/C circuit. I was so tempted to just hook up an AVI into the Haltech and use a flick switch to enable the A/C lol

Race Car life, needs AC

Oh yeah, alignment specs for those wondering

Front

  • 7 degrees of caster
  • 1mm toe out each side
  • -2.5 degrees of camber (turned out that way due to height)

Rear

  • 5mm extended traction rods
  • 0.5mm toe in each side (didn't go 2mm like before, as I'm hoping the traction rods will stop the ramp)
  • -1.5 degrres of camber
  • Like 5

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...