Jump to content
SAU Community

Recommended Posts

2 hours ago, ActionDan said:

Also what rice body kit bits can we add to the missus Tiguan to make it look less mum spec? 

Maxton Designs do small lips and stuff that might suit your aesthetic needs.

Not sure if you got the PFL or FL MK2, just have a look here:

https://www.ausbodyworks.com.au/collections/tiguan

 

  • Like 1

Oh wow, these actually look quite nice. Might be a bit too subtle and still look mum spec though in my opinion.

What about wheels? I saw a Golf wagon the other day with some fancy rotiforms on it. Very unexpected and it looked great as they transformed the look of the whole car. Though depending on how the car is driven it may result in anguish having them murdered on curbs.

The 20s ride ok, just not with the Continental Contact Sport 5 it comes with. I've replaced them with Pirelli Scorpion Verde and it rides much better, albeit lost cornering grip and straight line traction.

I can blaze the front tyre(s) when I mash the pedal before the Haldex kicks in.

7 hours ago, Dose Pipe Sutututu said:

Won't gutter the wheels as easily too 

The country doesn't have gutters. Just huge ditches on the side of the road... 😛

  • Haha 2
7 hours ago, MBS206 said:

The country doesn't have gutters. Just huge ditches on the side of the road... 😛

I went to a CFA call out, during that wet AF winter, thought I'll put my car off the side of the road to clear the way, woops, too far, dropped in up to the sill on the passenger side immediately, did call out, had a few goes at getting it out (had just switched back to road tyres, no good lol).

Chucked my rear hitch receiver onto the DELP guys car and used my winch to pull the noise back out onto the road lol

Scratched my rims too :(

So yeah, I love those ditches!

 

  • Sad 1

Sound deadening some more, repaired the OEM mat between the rear seat and boot, covered its mum in sound deadening too.

New Maxi Cosi Titan Pro seat in too, got it for $299 on sale with 2% cash back via Cash Rewards. Brings it down to $293!

PXL_20230914_031444332.thumb.jpg.3bfa0a9382ba14f960a24ab16b508423.jpg

PXL_20230914_041900405.thumb.jpg.aeba9364e4ef0f3f4b6181786ecbbdf2.jpg

PXL_20230914_052036236.thumb.jpg.0435e6e25c97b71499142ebdfed1aa4e.jpg

PXL_20230914_053514521.thumb.jpg.8dca9a342ed4f0663f86e775cc8115c5.jpg

  • Like 3

They did ok, when compared to Toyota. Ever seen a Chaser? 

Btw.. my sound deadening efforts was worth it. Cabin noise has dropped, once I do the front doors and the roof lining it's going to be 0.01% less shit overall.

  • Like 2
  • Haha 3
1 hour ago, ActionDan said:

Man, R33 interior is iconic to me, mad memories. 

The rear floor mats.

Even to this day I reckon are wickedly awesome!

 

Some days I wish I still had some of that stuff for mine rather than stripped out to be used for track work only. At the time though, someone needed a way to make it less street able so I would keep my license / not die.

40 minutes ago, MBS206 said:

The rear floor mats.

Even to this day I reckon are wickedly awesome!

 

Some days I wish I still had some of that stuff for mine rather than stripped out to be used for track work only. At the time though, someone needed a way to make it less street able so I would keep my license / not die.

The Yaris has the floor mats from my 86

They are the best part of the interior LOL

No more mods, car is done, etc.

image.thumb.png.3dd195362f2e2686743844fb0032680a.png

So turns out my tiny AF lift pump is still moving enough fuel to pressurise my surge tank and even the fuel rail when both surge pumps are off. I'm getting about 0.55bar of fuel pressure at the rail with the surge pumps off and only the lift pump running.

This means that the OEM venturi/siphon is causing a massive restriction, enough to build that pressure. I've been told it's not too much to be worried about, however the inner efficient Asian that I am says no!

Pressurisation of the surge tank & running the lift pump harder does three things:

  • degrades the surge pumps quicker
  • more load on the electrical system as the surge works harder
  • by product of the above, more heat is generated
  • (possibly point 4) more heat generated means all 3x pumps swim in a warmer fuel soup and degrade faster

So yeah, at some stage I will need to remove that stupid fuel tank lid/hat/cover whatever the fk you want to call it and pop off the OEM venturi/siphon and pop this one on - pretty straight forward really, just massive CBF as I will smell like shit and inhale heaps of petrol in the process.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...