Jump to content
SAU Community

Recommended Posts

Thickest Oil for gearbox ??

Hey Guys and Girls,

so a little bit ago, i had the clutch replaced in my R34, since i got it back from the mechanic the gearbox has felt more clunky (changing to second when its cold sometimes is really hard, just feels like i can feel the gears clunking together). not sure as to what rating oil he has put in gearbox, so i want to change it to something i know is thicker.

what is the thickest oil ? or what oil would you recommend i put in it.

Link to comment
https://www.sau.com.au/forums/topic/468718-thickest-oil-for-gearbox/
Share on other sites

55 minutes ago, GTSBoy said:

Are you sure that you need thicker oil to solve this problem?

Yeah i think the thicker oil is going to make the box feel a little bit better for the mean time until i can get around to getting it rebuilt, a rebuild is gonna cost me at least 2k or more maybe. so in the mean time i was thinking thicker oil to make it feel a bit better and maybe damage it less ?? cause i can feel like the cogs hitting each other and i dont think that can be good for it.

 

57 minutes ago, Hadouken said:

Gtt or gtr?

Maybe you should ask him what he used. If your oil is to think then it will feel shit while the box is cold.

GTT, i will give him a phone call and ask him, before the clutch being replaced the gearbox didn't feel as bad as it does now. so im guessing the new oil is a bit thinner then the old oil.

I live in orange so winter is rather cold here, and if the box is a pain while cold in summer then i am guessing its going to be worse in winter here.

6 minutes ago, Hadouken said:

If you put thicker oil in your box will suffer even worse when cold!

Feeling the synchros is not a issue. If it's making noises then it's an issue.

Put redline in it if you think it needs a rebuild

Yeah i can feel the synchros, not making any bad noises tho, if i roll along in 3rd it seems like it is going to pop out of gear.

so avoid thicker oil then, shall do.

redline lightweight shockproof ??

also cheers for the advice :)

It may also simply be a clutch adjustment problem. I'd suggest talking to your mechanic to see what they think too. Depending on the exact clutch and pressure plate, and how your pedal is adjusted it could either be a pedal adjustment or thrust bearing carrier length issue.

And also ask exactly what oil they put in, and perhaps check the oil level (open the filler and see if you can touch fluid when you stick your finger in there).

Its very unlikely your gearbox suddenly developed an issue the day the clutch was changed....

  • Like 1
4 hours ago, Duncan said:

It may also simply be a clutch adjustment problem. I'd suggest talking to your mechanic to see what they think too. Depending on the exact clutch and pressure plate, and how your pedal is adjusted it could either be a pedal adjustment or thrust bearing carrier length issue.

And also ask exactly what oil they put in, and perhaps check the oil level (open the filler and see if you can touch fluid when you stick your finger in there).

Its very unlikely your gearbox suddenly developed an issue the day the clutch was changed....

I will check the oil level and go from there, and also ask him what oil he put in it.

 

i don't think it suddenly developed it, i think maybe the different oil made it feel bad and clunky, if that is possible ??

 

56 minutes ago, Dobz said:

^^ I agree with Duncan. Do you have to push the clutch solid to the floor to disengage it or change gears?

no the clutch disengages at top

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...