Jump to content
SAU Community

Recommended Posts

 

Due to financial reasons unfortunately i have to sell all my car parts. Spent way too much money buying all these parts and never even started building my motor yet so hoping to get some $$ back now.

 

 

1. Completely rebuilt rb26 head built by Pro-Built Engine Reconditioning Gold Coast.

New shims

K line valve guides

All cold side and sensors $2500

 

2. Rb30 series 2 block in good condition $100

 

3. Rb25 greddy copy plenum with all the vacuum lines and bolts $200

 

4. RB30DET (DOHC) Rebuild Kit with Ross Racing Forged Pistons 9.0:1

SPOOL Forged H Beam Conrods

Ross Forged Pistons (Rings, Pins and Locks Included)

Cometic MLS Head Gasket

ACL Race Series Main Bearings

ACL Race Series Big End Bearings

$2000

 

5. Rb26 forward facing plenum by Otaku racing

Billet CNC Aluminium Manifold (Suit RB26, RB26DETT)

90mm Throttle Body

Dual Feed Fuel Rail (Suit Top Feed 14mm Injectors)

IACV Port & Vac Line Ports

Water Line Kit

$950

 

6. Arp head studs for rb30/25/26

$200

 

7. Gates timing belt for rb30/26 and rb30/25

$100

 

8. Rb26 N1 oil pump

$250

 

9. Rb30 waterpump

$80

 

10. T78-33 T4 turbo, high flowed by Turbotech in Perth and newer installed after that.

$1300

 

11. Rb26 Trust/greddy T4 manifold

$400

 

12. Rb25 or z32 afm?? Brand new Chinaspec $25

 

13. R33 strut bar $100

 

14. R33 24mm heavy duty front sway bar. $250

 

I'm in Darwin but all parts can be delivered Australia wide on buyers expense. Best way to contact me text or ring 04 74 120 500.

 

 

Photos are in random order.

20170212_151005.jpeg20170212_150824.jpeg20170212_150839.jpeg20170212_150802.jpeg20170212_150713.jpeg20170212_150548.jpeg20170212_150532.jpeg20170212_150440.jpeg20170212_150405.jpeg20170212_150313.jpeg20170212_150150.jpeg20170212_150156.jpeg20170212_150014.jpeg20170212_145949.jpeg20170212_145942.jpeg20170212_145732.jpeg20170212_145612.jpeg20170212_145430.jpeg20170212_145313.jpeg20170212_145323.jpeg20170212_145229.jpeg

 

Link to comment
https://www.sau.com.au/forums/topic/469046-rb25-rb2630-part-out/
Share on other sites

It doesn't let me edit the first post but forgot to mention that rb30 rebuild kit is with 87mm pistons. Rb30 block i have there still got 86mm bores.

  • 3 weeks later...
  • 3 weeks later...
  • 2 weeks later...

Just wanted to thank the vendor. Pleasure to deal with. Upfront, honest and willing to work together for mutual benefit. Shame you don't own a store. Would definitely deal with you again. Can't wait to see those parts help me fry some tyres. Thanks again.

Thank you Khezz, was pleasure dealing with you mate!

Items that are sold so far: 

*4. RB30DET (DOHC) Rebuild Kit with Ross Racing Forged Pistons 9.0:1

*6. Arp head studs

*7. Gates timing belt

*9. Rb30 waterpump

*10. T78-33 T4 turbo

 

Rb26 head is still available, i accidentally wrote last time that it is sold. Ahh if i could just edit my own posts like it always used to be possible that'd be great.  

 

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...