Jump to content
SAU Community

Kasko's R34 GTT Build

Manuel Kasko
 Share

Recommended Posts

Manuel Kasko Grand Master

Manuel Kasko

Posted
  • Author
Posted
9 hours ago, MatthewT85 said:

It's interesting seeing your results. I have atr43ss2 with a cooling pro return flow and the first time I had it tuned it made about 280. Not long after getting it back it started knocking coming on boost. Took it back and 4 degrees of timing was taken out to keep it safe. Bringing it back to 250ish. Apparently it just couldn't take sensible timing and had high IAT. Wondering if it's same issues.

Also i had a gasket fail too, but it was the manifold one, was some cheap shit one and studs were finger tight

From all the threads I have read, it seems return flow is not ideal for trying to get past 250rwkw on 98. 
They just aren't efficient enough. Plenty of people have made more power but it's normally with bigger turbos and better setups. 

Tuner didn't mention anything about high IAT or timing issues on mine, it seemed though to have pressure drop across the intercooler.
Post intercooler it would hit 20psi and bleed down to 16psi, pre intercooler it would hit 20psi and hold around 19psi. 

Enjoy the 250rwkw though and if you feel like chasing down the issue then do that once the 250 gets boring, that's what I'm doing :)

MatthewT85 Proficient

MatthewT85

Posted
Posted
3 hours ago, Manuel Kasko said:

From all the threads I have read, it seems return flow is not ideal for trying to get past 250rwkw on 98. 
They just aren't efficient enough. Plenty of people have made more power but it's normally with bigger turbos and better setups. 

Tuner didn't mention anything about high IAT or timing issues on mine, it seemed though to have pressure drop across the intercooler.
Post intercooler it would hit 20psi and bleed down to 16psi, pre intercooler it would hit 20psi and hold around 19psi. 

Enjoy the 250rwkw though and if you feel like chasing down the issue then do that once the 250 gets boring, that's what I'm doing :)

yeah i have noticed that too about 250 being the average.  Just weird that I had 280 at one point, although tuner did find the gate slightly open and once that was tightened maybe it didnt like it... but didnt show up at the time.

The only thing I can see different on your graph is mine has boost around 16psi and slowly rises to 19-20ish at redline, in my other thread people have mentioned things like CAS so I guess I just have to work out what I want to start with...

Well having 280 at one point makes the 250 boring straight away :(

  • 1 month later...
B-rice Mentor

B-rice

Posted
Posted
Currently have a weird grinding noise between 1000-2000rpm coming from the front of the engine around the CAS/Cylinder 1 
Going to try get the CAS off over the next few days and work out if that's what's causing it.

Video of the grinding noise if anyone is interested in hearing it.

The video is just there for the sound, not for the actual footage.
Had a few people comment on it being potato footage, the intent was just to get the noise not footage of the front of a normal RB25neo...
 

Also have a loud fuel pump, so might pull that out and try cut a bit off the bracket and install another clamp on there.
Hopefully that will stop the buzzing that it currently has.


Did you change your timing belt when I changed mine the idler made it whine like that.
  • 2 weeks later...
jmknights93 Mentor

jmknights93

Posted
Posted
On 2/23/2017 at 9:53 PM, Manuel Kasko said:

Currently have a weird grinding noise between 1000-2000rpm coming from the front of the engine around the CAS/Cylinder 1 
Going to try get the CAS off over the next few days and work out if that's what's causing it.

Video of the grinding noise if anyone is interested in hearing it.

The video is just there for the sound, not for the actual footage.
Had a few people comment on it being potato footage, the intent was just to get the noise not footage of the front of a normal RB25neo...
 


Also have a loud fuel pump, so might pull that out and try cut a bit off the bracket and install another clamp on there.
Hopefully that will stop the buzzing that it currently has.

I'd be pretty confident in saying that you are running a gates racing timing belt? They usually make that sound for the first couple thousand kms. The noise from the belt will go away after running in. It's also quite possible that your timing belt may be a touch to tight. 

Manuel Kasko Grand Master

Manuel Kasko

Posted
  • Author
Posted
1 hour ago, jmknights93 said:

I'd be pretty confident in saying that you are running a gates racing timing belt? They usually make that sound for the first couple thousand kms. The noise from the belt will go away after running in. It's also quite possible that your timing belt may be a touch to tight. 

Hey mate, thanks for the info.

I'm actually running just a genuine timing belt.
Someone actually presumed the same thing when they heard the noise so maybe it is a touch too tight and makes it sound like the gates do.
I purposely didn't get a gates because I saw so many posts about them being loud. 

  • Like 1
jmknights93 Mentor

jmknights93

Posted
Posted
6 minutes ago, Manuel Kasko said:

Hey mate, thanks for the info.

I'm actually running just a genuine timing belt.
Someone actually presumed the same thing when they heard the noise so maybe it is a touch too tight and makes it sound like the gates do.
I purposely didn't get a gates because I saw so many posts about them being loud. 

I was half right with my answer then haha. Easy fix.

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      R34 GT-T cycling ABS pump

      By Kinkstaah · Posted

      Lets say I wanted to buy this, specifically for this purpose. How do I actually perform the function. Can I still buy a Consult-1? Am I about to be burned by the fact my car is a 2000 model Series 2 R34 and thus will be some stupid other system? Do I just need this -> https://obd2australia.com.au/product/nissan-consult-14-pin-to-usb-ddl-diagnostic-interface-with-ftdi-ft232r-chip/ And with what software?
    • GTSBoy
      33 GTR Broken front wheel knuckle

      By GTSBoy · Posted

      That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • R32 TT
      33 GTR Broken front wheel knuckle

      By R32 TT · Posted

      Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • MBS206
      33 GTR Broken front wheel knuckle

      By MBS206 · Posted

      Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • GTSBoy
      R34 auto to manual conversion help

      By GTSBoy · Posted

      The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
×
×
  • Create New...