Jump to content
SAU Community

Kasko's R34 GTT Build

Manuel Kasko
 Share

Recommended Posts

Manuel Kasko Grand Master

Manuel Kasko

Posted
  • Author
Posted
9 hours ago, MatthewT85 said:

It's interesting seeing your results. I have atr43ss2 with a cooling pro return flow and the first time I had it tuned it made about 280. Not long after getting it back it started knocking coming on boost. Took it back and 4 degrees of timing was taken out to keep it safe. Bringing it back to 250ish. Apparently it just couldn't take sensible timing and had high IAT. Wondering if it's same issues.

Also i had a gasket fail too, but it was the manifold one, was some cheap shit one and studs were finger tight

From all the threads I have read, it seems return flow is not ideal for trying to get past 250rwkw on 98. 
They just aren't efficient enough. Plenty of people have made more power but it's normally with bigger turbos and better setups. 

Tuner didn't mention anything about high IAT or timing issues on mine, it seemed though to have pressure drop across the intercooler.
Post intercooler it would hit 20psi and bleed down to 16psi, pre intercooler it would hit 20psi and hold around 19psi. 

Enjoy the 250rwkw though and if you feel like chasing down the issue then do that once the 250 gets boring, that's what I'm doing :)

MatthewT85 Proficient

MatthewT85

Posted
Posted
3 hours ago, Manuel Kasko said:

From all the threads I have read, it seems return flow is not ideal for trying to get past 250rwkw on 98. 
They just aren't efficient enough. Plenty of people have made more power but it's normally with bigger turbos and better setups. 

Tuner didn't mention anything about high IAT or timing issues on mine, it seemed though to have pressure drop across the intercooler.
Post intercooler it would hit 20psi and bleed down to 16psi, pre intercooler it would hit 20psi and hold around 19psi. 

Enjoy the 250rwkw though and if you feel like chasing down the issue then do that once the 250 gets boring, that's what I'm doing :)

yeah i have noticed that too about 250 being the average.  Just weird that I had 280 at one point, although tuner did find the gate slightly open and once that was tightened maybe it didnt like it... but didnt show up at the time.

The only thing I can see different on your graph is mine has boost around 16psi and slowly rises to 19-20ish at redline, in my other thread people have mentioned things like CAS so I guess I just have to work out what I want to start with...

Well having 280 at one point makes the 250 boring straight away :(

  • 1 month later...
B-rice Mentor

B-rice

Posted
Posted
Currently have a weird grinding noise between 1000-2000rpm coming from the front of the engine around the CAS/Cylinder 1 
Going to try get the CAS off over the next few days and work out if that's what's causing it.

Video of the grinding noise if anyone is interested in hearing it.

The video is just there for the sound, not for the actual footage.
Had a few people comment on it being potato footage, the intent was just to get the noise not footage of the front of a normal RB25neo...
 

Also have a loud fuel pump, so might pull that out and try cut a bit off the bracket and install another clamp on there.
Hopefully that will stop the buzzing that it currently has.


Did you change your timing belt when I changed mine the idler made it whine like that.
  • 2 weeks later...
jmknights93 Mentor

jmknights93

Posted
Posted
On 2/23/2017 at 9:53 PM, Manuel Kasko said:

Currently have a weird grinding noise between 1000-2000rpm coming from the front of the engine around the CAS/Cylinder 1 
Going to try get the CAS off over the next few days and work out if that's what's causing it.

Video of the grinding noise if anyone is interested in hearing it.

The video is just there for the sound, not for the actual footage.
Had a few people comment on it being potato footage, the intent was just to get the noise not footage of the front of a normal RB25neo...
 


Also have a loud fuel pump, so might pull that out and try cut a bit off the bracket and install another clamp on there.
Hopefully that will stop the buzzing that it currently has.

I'd be pretty confident in saying that you are running a gates racing timing belt? They usually make that sound for the first couple thousand kms. The noise from the belt will go away after running in. It's also quite possible that your timing belt may be a touch to tight. 

Manuel Kasko Grand Master

Manuel Kasko

Posted
  • Author
Posted
1 hour ago, jmknights93 said:

I'd be pretty confident in saying that you are running a gates racing timing belt? They usually make that sound for the first couple thousand kms. The noise from the belt will go away after running in. It's also quite possible that your timing belt may be a touch to tight. 

Hey mate, thanks for the info.

I'm actually running just a genuine timing belt.
Someone actually presumed the same thing when they heard the noise so maybe it is a touch too tight and makes it sound like the gates do.
I purposely didn't get a gates because I saw so many posts about them being loud. 

  • Like 1
jmknights93 Mentor

jmknights93

Posted
Posted
6 minutes ago, Manuel Kasko said:

Hey mate, thanks for the info.

I'm actually running just a genuine timing belt.
Someone actually presumed the same thing when they heard the noise so maybe it is a touch too tight and makes it sound like the gates do.
I purposely didn't get a gates because I saw so many posts about them being loud. 

I was half right with my answer then haha. Easy fix.

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...