Jump to content
SAU Community

Recommended Posts

That's an expensive set of nice wheels. Don't spoil it by putting stupidly narrow stretched tyres like some people do!

Something like 285 35 may do the job. If the tyres stick out too much make the guards bigger don't shrink the tyres!

  • Like 6
Link to comment
https://www.sau.com.au/forums/topic/469878-19x105-te37sl/#findComment-7821762
Share on other sites

I ran 275x35x19 on my R34 GTR (work d9r 19 x 10.5 +15), which is mildly lowered. I couldn't go full lock without scrubbing on the inner guard linings on both sides.

I went down to a 275x30x19 tyre and used a heat gun on my inner linings. No scrub whatsoever now.

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/469878-19x105-te37sl/#findComment-7822513
Share on other sites

9 minutes ago, OV33RR said:

275/35r19 there pretty big dont think id like to go bigger scrubbing as it is

I understand - but then why go 10.5 wide if your not going to put the appropriate tire on there.

The below is 10 wide with a 285 - see how the sidewall is square - surely that will give the car better turning and handling - please someone correct me if I'm wrong. 

IMG_1513.JPG

  • Like 4
Link to comment
https://www.sau.com.au/forums/topic/469878-19x105-te37sl/#findComment-7824201
Share on other sites

  • 2 months later...
16 hours ago, vxsr33 said:

From what i have read 275 or 285 is the recommended width for a 10.5 inch rim. 275 on a 9 inch rim isn't recommended as its too wide.

275 on 9in wheels are within the LVTA guidelines but the proof of the pudding is in the photos - OPs tyres are clearly stretched and the above 285s on 10 in wheels look just right.

Link to comment
https://www.sau.com.au/forums/topic/469878-19x105-te37sl/#findComment-7838260
Share on other sites

  • 3 weeks later...

I've got the same wheels offset etc, previously I had 275/30 no scrubbing now I have 275/35 19's nitto nt05 scrub the inner and outer guard. Then again mine isn't ride height, I wouldn't go anything thicker then the 30 series unless u want to do some suspension and camber work. My front is at 3 degrees camber to prevent my guards ripping again.

 

Link to comment
https://www.sau.com.au/forums/topic/469878-19x105-te37sl/#findComment-7841048
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...