Jump to content
SAU Community

Recommended Posts

Knocking coming from r33 gtst rear

Hey there, 

So recently I noticed quite a loud knocking sound coming from the right rear and sometimes the left front of my r33 gtst. I notice it more from the rear when going over bumps (kinda sounds like metal on metal) and notice it from the front when turning into my driveway. Just wondering what you guys think it could be, I was thinking maybe the cv joints or the shocks, but that is just an idea from reading other posts. 

Cheers 

Link to comment
https://www.sau.com.au/forums/topic/471334-knocking-coming-from-r33-gtst-rear/
Share on other sites

Cats like to climb into warm places during winter,  maybe a cat climbed up in there while you were parked and the exhaust was warm and is now stuck. I would stick my head under there and say 'here puss', see if you hear any meowing.

It's usually shocks mine has blown out a few...also sometimes a sharp stone with road tar on it will will get jammed between the body and the suspension (had this happen a couple of times in the summer).

Edited by stewart1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...