Jump to content
SAU Community

Recommended Posts

Hey guys need a bit off help. At the moment I'm running stock boost of 6 psi. I originally had a boost tee hooked up but it was boosting up around the 15 psi mark. So I removed it and threw it away and ordered a new boost tee. It arrived today and I hooked it up and I'm having the same issue. On the lowest setting it is boosting around the 15 psi mark. So I brought a new vacuum line and hooked that up. Still over boosting. I've checked everywhere for any vacuum leaks and can't find anything. Am I missing something. Also yes the boost tee is hooked up the right way. The arrow is pointing to the actuator.

Link to comment
https://www.sau.com.au/forums/topic/472064-r33-overboosting/
Share on other sites

Update

So I wound the turbo towards more boost. Still over boosting around 16psi. I've shorten my vacuum line from intake manifold to my turbo tee to my turbo actuators and still no difference. Bit lost

Does your car have an aftermarket intercooler and piping on it? The stock cold side cooler pipe has a nipple on it for boost reference. I connect boost controller to that. You may want to change your vacuum line to somewhere before the throttle body.

 

While it's still advised, I recently did it myself, and did it off the black pipe coming from the turbo, I doubt this will fix your issue, I had mine running off the manifold for years and it was fine, just changes the characteristics of how it comes on. 

If the actuator is working (i.e. 5/6psi with no boost-T) then the only factor is the Boost-T itself, How far did you wind it to the '+' side earlier? and when doing so does the winder go into the body or out of? 

  • Like 1

When I'm winding the turbo tee towards the more boost +. It is coming out of the body of the turbo tee. I wound it all most all the way towards the + but stopped cause it stopped clicking and I thought the knob was going to come off.

6 hours ago, GTofuS-T said:

While it's still advised, I recently did it myself, and did it off the black pipe coming from the turbo, I doubt this will fix your issue, I had mine running off the manifold for years and it was fine, just changes the characteristics of how it comes on. 

If the actuator is working (i.e. 5/6psi with no boost-T) then the only factor is the Boost-T itself, How far did you wind it to the '+' side earlier? and when doing so does the winder go into the body or out of? 

Whilst I don't disagree, he had the same issue with the previous boost tee he was using...so unless they're the same model of boost tee, I think it'll be in the plumbing of what he's done or something to do with that solenoid that changes boost depending on RPM.

Speaking of, have you tried grounding that yet for the constant boost pressure?

Make sure no splits/leaks in the vacuum hose going to boost tee.

They are two different turbo tees. One was turbo smart and other is neon. As shown in photo. Why solenoid are you talking about. If it's the one where the factory boost lines went to. That is not in use anymore cause I've got the turbo tee in line. Hoses are all is good condition.

Well assuming you can connect that hose to the boost tee directly to the actuator and get 6psi, it can only be the boost T responsible.

I'd just get an RB20 actuator and fit that...think they are 10psi stock from memory.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...