Jump to content
SAU Community

Recommended Posts

  • 2 months later...
  • 3 weeks later...

Thanks my dudes. 

Going to get the paint finally sorted in a few weeks, unfortunately I was struck with the old "Low hanging exhaust", so I need to get myself a Tig to remake it, not the worst thing in the world. 

On 6/30/2018 at 7:04 PM, Callum14 said:

let’s be real no one really cares. 

Come on, no need to be like that. People are subscribed to this thread (myself included) which says the exact opposite! 

  • 2 weeks later...

Listen to somebody who has spent more money on cars than you could ever dream of. The car you have will be everything you want it to be if you just stick to it. They are a great chassis and the suspension is ahead of most cars from early 2000 so the only difference between your car and and a truly fast, safe car is the components that make them that way. Get good suspension, tyres, brakes but most of all read everything on these forums and do it right. Oh, and power of course but only if the engine is up to it. About 270 to 300rwkw is where most people would be happy. If you are young, then now is the time to try an engine rebuild or paint the car yourself or change suspension etc. Youtube is your friend.

Yeh I’ll eventually chase some power, but got other debts/stuff to pay for. 

Hard enough convincing the misso to let me paint it haha, but she’s cool with it all. 

And thanks Prank, everyone has a story to tell I guess!

Anyway small update, paint in 2 weeks, in anticipation I found some coupe pods (would have liked Sedan pods but these were $40) hard to see in photo but it makes it look so much better  

3A030A8C-09FA-4876-BF79-8B7CEAC20743.thumb.jpeg.5d8a8d35db622a32aab3bb66c817f616.jpeg

 

Also installed my clutch pedal, have a manual brake pedal to go in (or if I cbf just cut this one down) 

0B644800-B409-479C-BADA-27F6747F80AD.thumb.jpeg.59752b55489c76515048c26d026e8726.jpeg

Wont even look for a gearbox until Paint is done. But will start collecting bits and pieces. 

  • Like 1

I remember years ago we converted a XYGT Falcon from auto to manual and after driving a manual in my own car I didn't test how the pedals feel. So we finished the job, original brake pedal from the auto still in place. Trouble is, I hadn't gotten used to the pedal placement as the clutch was in the same place as my car. We were heading out to Penrith, long before the roads had stop lights at the intersection of The great western Highway and Mamre Road, and as I came to the stop sign I put my foot on the accelerator instead of the brake because the brake pedal was so far to the left. 

We flew across the Great Western Highway at close to 100kph and hit absolutely nothing on a Saturday afternoon with traffic everywhere. Change the brake pedal.

Just now, skylinecouple said:

We flew across the Great Western Highway at close to 100kph and hit absolutely nothing on a Saturday afternoon with traffic everywhere. Change the brake pedal.

Jesus, yeah I just cut it down when I converted my Sylvia and it was fine, but I have a manual one to go in so might as well do it. 

A friend bought a Daihatsu something or other which came from the factory as an auto. Brake pedal had the same problem. To the left. He had just been down the shop to get oil in his normal car as he was doing an oil change on the Daihatsu. Got in the little bastard after topping up the oil, put it in reverse and smashed the accelerator to the floor thinking it was the brake.

Trouble is, he had the drivers door open at the time and it hooked onto the fence beside the driveway. Broke the fence, bent the door hinges, crushed the door itself and rammed the car behind him, his car. 

You may get used to the pedal but it's not funny when somebody else drives it. Well, in the Daihatsu it was, but not any other time.

Just thought I'd ask, have you decided on a colour if you paint it ? Black is good but damn, hard to keep clean or shiny. What was the original colour ?

2 hours ago, skylinecouple said:

Just thought I'd ask, have you decided on a colour if you paint it ? Black is good but damn, hard to keep clean or shiny. What was the original colour ?

I've been set on just staying black and going KH3 Black, but I've seen a few in KN6 grey/black, and it makes it pop a little more. 

I hate swirl marks, but too much more effort going from dark to light. 

  • 1 month later...

Looks great. Couple of good polishes and it will look like Darth's helmet. Don't go too dark on window tinting. Makes it cop bait. Black paint, black tint, black tyres. It's all a bit much. 

On 9/29/2018 at 6:57 PM, skylinecouple said:

Looks great. Couple of good polishes and it will look like Darth's helmet. Don't go too dark on window tinting. Makes it cop bait. Black paint, black tint, black tyres. It's all a bit much. 

I hate dark tint. I drive a low car, the last thing I want is to give them a reason to pull me over haha. 

It looks low but it's not really (apart from the exhaust)

Need to get:
- New Exhaust
- Manual conversion. 

 

Also trying to take some nice pics to upload. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...