Jump to content
SAU Community

Recommended Posts

  • 2 months later...
  • 3 weeks later...

Thanks my dudes. 

Going to get the paint finally sorted in a few weeks, unfortunately I was struck with the old "Low hanging exhaust", so I need to get myself a Tig to remake it, not the worst thing in the world. 

On 6/30/2018 at 7:04 PM, Callum14 said:

let’s be real no one really cares. 

Come on, no need to be like that. People are subscribed to this thread (myself included) which says the exact opposite! 

  • 2 weeks later...

Listen to somebody who has spent more money on cars than you could ever dream of. The car you have will be everything you want it to be if you just stick to it. They are a great chassis and the suspension is ahead of most cars from early 2000 so the only difference between your car and and a truly fast, safe car is the components that make them that way. Get good suspension, tyres, brakes but most of all read everything on these forums and do it right. Oh, and power of course but only if the engine is up to it. About 270 to 300rwkw is where most people would be happy. If you are young, then now is the time to try an engine rebuild or paint the car yourself or change suspension etc. Youtube is your friend.

Yeh I’ll eventually chase some power, but got other debts/stuff to pay for. 

Hard enough convincing the misso to let me paint it haha, but she’s cool with it all. 

And thanks Prank, everyone has a story to tell I guess!

Anyway small update, paint in 2 weeks, in anticipation I found some coupe pods (would have liked Sedan pods but these were $40) hard to see in photo but it makes it look so much better  

3A030A8C-09FA-4876-BF79-8B7CEAC20743.thumb.jpeg.5d8a8d35db622a32aab3bb66c817f616.jpeg

 

Also installed my clutch pedal, have a manual brake pedal to go in (or if I cbf just cut this one down) 

0B644800-B409-479C-BADA-27F6747F80AD.thumb.jpeg.59752b55489c76515048c26d026e8726.jpeg

Wont even look for a gearbox until Paint is done. But will start collecting bits and pieces. 

  • Like 1

I remember years ago we converted a XYGT Falcon from auto to manual and after driving a manual in my own car I didn't test how the pedals feel. So we finished the job, original brake pedal from the auto still in place. Trouble is, I hadn't gotten used to the pedal placement as the clutch was in the same place as my car. We were heading out to Penrith, long before the roads had stop lights at the intersection of The great western Highway and Mamre Road, and as I came to the stop sign I put my foot on the accelerator instead of the brake because the brake pedal was so far to the left. 

We flew across the Great Western Highway at close to 100kph and hit absolutely nothing on a Saturday afternoon with traffic everywhere. Change the brake pedal.

Just now, skylinecouple said:

We flew across the Great Western Highway at close to 100kph and hit absolutely nothing on a Saturday afternoon with traffic everywhere. Change the brake pedal.

Jesus, yeah I just cut it down when I converted my Sylvia and it was fine, but I have a manual one to go in so might as well do it. 

A friend bought a Daihatsu something or other which came from the factory as an auto. Brake pedal had the same problem. To the left. He had just been down the shop to get oil in his normal car as he was doing an oil change on the Daihatsu. Got in the little bastard after topping up the oil, put it in reverse and smashed the accelerator to the floor thinking it was the brake.

Trouble is, he had the drivers door open at the time and it hooked onto the fence beside the driveway. Broke the fence, bent the door hinges, crushed the door itself and rammed the car behind him, his car. 

You may get used to the pedal but it's not funny when somebody else drives it. Well, in the Daihatsu it was, but not any other time.

Just thought I'd ask, have you decided on a colour if you paint it ? Black is good but damn, hard to keep clean or shiny. What was the original colour ?

2 hours ago, skylinecouple said:

Just thought I'd ask, have you decided on a colour if you paint it ? Black is good but damn, hard to keep clean or shiny. What was the original colour ?

I've been set on just staying black and going KH3 Black, but I've seen a few in KN6 grey/black, and it makes it pop a little more. 

I hate swirl marks, but too much more effort going from dark to light. 

  • 1 month later...

Looks great. Couple of good polishes and it will look like Darth's helmet. Don't go too dark on window tinting. Makes it cop bait. Black paint, black tint, black tyres. It's all a bit much. 

On 9/29/2018 at 6:57 PM, skylinecouple said:

Looks great. Couple of good polishes and it will look like Darth's helmet. Don't go too dark on window tinting. Makes it cop bait. Black paint, black tint, black tyres. It's all a bit much. 

I hate dark tint. I drive a low car, the last thing I want is to give them a reason to pull me over haha. 

It looks low but it's not really (apart from the exhaust)

Need to get:
- New Exhaust
- Manual conversion. 

 

Also trying to take some nice pics to upload. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...